Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide
Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide

324mm Front Brake Package Suits: S13, S14, S15

324mm Front Brake Package

From: $ 1,440.00

Spend $250+ for Free Shipping
Free Australia Wide Postage on Order $250+
Pickup Available
South Kingsville, VIC 3015 | Ready in 1-2 Hours | Mon - Fri 10am to 4pm


Description

As OEM 4 piston calipers are becoming difficult to source and often need rebuilding, we have put together this brake package with calipers included. HFM.Parts 324mm Front Rotor Package has been specifically assembled for its quality, availability, performance and affordability.

HFM.Parts 324mm Rotors are visually stunning and our Two Piece Rotors have an aluminium hat made of aircraft grade T4-2024 aluminium that have been heat-treated for extra strength and longevity. The design allows the rotors to expand & contract with changes in temperature and rotational mass to dissipate heat quickly for optimal performance.
Also included are Wilwood’s Forged Narrow Mount Dynalite Calipers which are some of the strongest calipers in its class. The unique forging process substantially increases resistance to deflection and caliper separation under load, with tests proving it outperforms all existing styles of the popular caliper size. We also have two WIlwood brake pads to choose from so you can further optimise your braking performance for a completely tailored setup. To instal the Wilwood Caliper, you will receive custom HFM.Parts Caliper Adapters which are made of T6-6061 Billet Aluminium with black anodising and stainless steel heli-coils.

The package is completed with a set of HFM.Parts Braided Brake Lines with custom fittings that are longer than standard OEM lines to compensate for the increase in rotor size and are, of course, stronger than standard rubber lines.

Why don’t Wilwood calipers have dust boots?

 

*Keep in mind this is an increase of .9 of Piston Area (in²) from the OEM caliper which, depending on your vehicle’s set up and intended use, could affect your brake bias.

Compatibility

Requirements:

OEM S14/15 – 5 Stud Hub & Knuckle
Minimum 17″ Wheels

Make sure your vehicle meets the minimum requirements, listed comptibility alone does NOT guarantee fitment.
Our compatibility list is based on original equipment manufacturer (OEM) specifications. While we strive for accuracy, variations may exist due to vehicle sub-models or other factors. To ensure correct fitment, please verify compatibility with your vehicle before purchasing. You can also check your exact model against https://www.wheel-size.com/

In the Box

1x Pair HFM.Parts 324mm Front Rotors (your selection)
1x HFM.Parts Caliper Adapters
1x Pair Wilwood Conversion Brake Fittings
1x Pair HFM.Parts Braided Brake Lines
1x Pair Wilwood Calipers
1x Front Set Wilwood Brake Pads (your selection)

*Please note: Calipers come in “Hard Ano Alley” colour only.

FAQs

Q. Will this fit my vehicle? A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits. Q. Why don’t Wilwood Calipers (P/N 120-11573) have dust boots? A. As Wilwood calipers are designed for high-temperature use, dust boots can melt or become brittle and lose their effectiveness. Without dust boots you have better access when inspecting your caliper and the process for changing your brake pads doesn’t alter. You should wash away any foreign materials, push the pistons back into position and replace your brake pads as normal.  

Install Guides

 
Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page


Customer Photos
We're yet to upload our customers photos.
Want to be featured here? Send in your best shots: sales@hfm.parts

4.96 Stars
Customer Reviews
30 reviews
    Bought this conversion kit for my RWD Stagea running 32GTR sumitomo callipers, everything fit perfectly and as it should, very happy with the quality of the items received.
    Lachlan Reed
    We are currently running the 2 piece brake discs on our endurance race car and they are doing a great job. The weight saving, cooling, reduced replacement cost and the look are all great points as to us returning for more. The team at HFM are knowledgeable on there product and are commited to working through the intricacies of racing with us. GREAT JOB!!
    Blake Morgan
    Using the 2 piece rotors on our endurance car and so far the results are good. Huge weight difference, better cooling, cheaper rotor replacement,and the look is just a bonus. The HFM Team are great with there backup service and comitment to working on some of the more intricacies of a race car. GREAT JOB.
    Blake Morgan
    Worked great but should supply another set of washers, ran into slight clearance issues. Had to stack the older ones to provide just enough clearance
    Kevin ho
    Easy install works perfectly on my track car
    Damien
    Great quality, super light and actual bolt on fitment. Great budget upgrade for a street car!
    Anonymous
    Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag "no biggy had some spares in my garage" and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can't wait to see how they go at my next time attack day.
    Stuart Jackson
    Awesome upgrade and still retaining stock calipers. Combined with the rear brake upgrade and HFM BM57 master cylinder. Great long lasting stopping power we have street and track tested this combo with great results. Its totally transformed the car. Great after sales service cheap as and fast shipping. Thanks to HFM Dot Parts for the killa and ultra simple upgrades keep up the great work from the team at Noakie Spec Racing https://www.facebook.com/NoakieSpecRacing
    Brett Noakes
    Awesome kit i have great results form street and track testing. Great price. Has totally transformed the car with combining the rear upgrade and hfm bm57 master. Plenty of after sales support and fast shipping. Thanks to HFM. Parts from the Team at Noakie Spec Racing Keep up the killa work.
    Brett Noakes
    Very quick shipping during pandemic. Allowed me to install straight away
    Luke Fowler
    Very simple to install would highly recommend these parts for your silvia
    MATTHEW craig
    Great quality and fitment, super fast postage. Very happy
    Andrew Clifton
    Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!
    Austin Mason
    We run these rotors on our race car without any issues at all. Great fit and the overall finish and quality is second to none. Would recommend these on any street or race application as an upgrade.
    Dion Coulls
    A true bolt on product. It is a perfect fit and super simple to install. The finish and overall quality of the product is 10/10.
    Dion Coulls
    Everything bolted up just how the instructions guided. Great fitment and easy to install. The only downside is I couldn't justify ordering the whole kit with rotors due to the shipping being high. This should be marketed more in the US since no one is doing it here. 10/10 would recommend to anyone looking into a rotor upgrade on their car. Top marks for this company!
    Brent Gregory
    Opting to keep my 17" wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my - and arguably most - 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively. The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb. The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle - trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too! This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing. Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top. Great piece of gear HFM, keep up the great work! These brakes fit under R33 GTR Wheels, 17x9 +22 Advan SA3R's and 17x9 +22 Sparco Crimson.
    Steve
    Very good to deal with
    Adrian Oliver
    very good and great repsonse times, product feels good
    Andrew Finn
    Very good would go through them again
    Rodney petrovic
    yeah great install havent used them yet but sure they will be great
    garry stanton
    Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you
    Riley McConaughey
    Overall an easy install, everything works great and looks fantastic!
    Shaun Ewing
    Excellent service, fast freight time, will most definitely use again.
    Stephen Henley
    Very nice product, fitted perfectly
    Alan U.
Leave a Review
Leave a review for “324mm Front Brake Package Suits: S13, S14, S15”

Search