324mm Rotor Caliper Adapter Brackets Suits: R32 GTR & R32 GTST-4
324mm Rotor Caliper Adapter Brackets
$ 199.00
Description
Our caliper adapters have been finely crafted out of T6-6061 hard anodized billet aluminium and are fitted with quality stainless steel Heli-Coils to maintain strength. Fitting these adapters will enable you to increase your rotor size significantly to our 324mm GTR rotors whilst being able to keep your existing calipers. Giving you improved heat disbursement and braking.
Compatibility
 | Nissan Make | Skyline R32 GTR Model | 1989 - 1994 Production | Minimum Requirements | ||
| Nissan Skyline R32 GTST-4 | ||||||
Additional Requirements:
324mm R33 GTR Rotors
Minimum 17″ Wheels
Use With R32 GTR or R33 GTS-T Calipers (No Brembo Brake Calipers)
Make sure your vehicle meets the minimum requirements, listed compatibility alone does NOT guarantee fitment.
Key:
Our compatibility list is based on original equipment manufacturer (OEM) specifications. While we strive for accuracy, variations may exist due to vehicle sub-models or other factors. To ensure correct fitment, please verify compatibility with your vehicle before purchasing. You can also check your exact model against https://www.wheel-size.com/ Fits
Must meet Minimum Requirements
In the Box
Here's everything included in your order, so you know exactly what to expect.
1x Pair of Caliper Adapters
Bolt Kit for Fitment
FAQs
Q. Will this fit my vehicle?
A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle
is
not
listed, then we don't know if it fits.
Q. What brake pads do you recommend to use with this adapter?
A. We recommend DB1346 which corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface.
Q. What will happen if I use standard brake pads?
A. Although you can use your standard brake pads, you will have a 2mm pad overhang. Using DB1346 or equivalent will reduce the overhang.
Q. Will I still be able to use my OEM R32 GTR wheels?
A. Yes, an OEM R32 GTR has 17″ wheels. This kit requires a minimum of 17″ wheels.
Q. I have a GTS4 which shares the same running gear as an R32 GTR, will I be able to use these adapters?
A. The GTS4 uses R32 GTST calipers which are smaller than 32 GTR. In order to use this kit on your GTS4 you will need to instal R33 GTST calipers.
Q. I have an aftermarket caliper, can I still use these adapters?
A. No, these adapters have been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers.
Q. What material are the adapters made from?
A. Our adapters are made using high-quality T6-6061 Billet Aluminium.
Q. Do I have to modify any brake components to use these adapters?
A. Yes, you will need to modify the knuckle in order to fit the adapters. Please refer to our install guide above.
Q. Will I be able to use my existing brake lines even though I’m spacing out the caliper?
A. You may be able to massage your existing brake lines into position but it is recommended that you use longer lines if necessary.
Install Guides
Disclaimer
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page
Customer Photos
We're yet to upload our customers photos.
Want to be featured
here?
Send in your best shots: sales@hfm.parts
4.96 Stars
Customer Reviews
25 reviews
Bought this conversion kit for my RWD Stagea running 32GTR sumitomo callipers, everything fit perfectly and as it should, very happy with the quality of the items received.
We are currently running the 2 piece brake discs on our endurance race car and they are doing a great job. The weight saving, cooling, reduced replacement cost and the look are all great points as to us returning for more. The team at HFM are knowledgeable on there product and are commited to working through the intricacies of racing with us. GREAT JOB!!
Using the 2 piece rotors on our endurance car and so far the results are good. Huge weight difference, better cooling, cheaper rotor replacement,and the look is just a bonus. The HFM Team are great with there backup service and comitment to working on some of the more intricacies of a race car. GREAT JOB.
Worked great but should supply another set of washers, ran into slight clearance issues. Had to stack the older ones to provide just enough clearance
Easy install works perfectly on my track car
Great quality, super light and actual bolt on fitment. Great budget upgrade for a street car!
Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag "no biggy had some spares in my garage" and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can't wait to see how they go at my next time attack day.
Awesome upgrade and still retaining stock calipers. Combined with the rear brake upgrade and HFM BM57 master cylinder. Great long lasting stopping power we have street and track tested this combo with great results. Its totally transformed the car.
Great after sales service cheap as and fast shipping.
Thanks to HFM Dot Parts for the killa and ultra simple upgrades keep up the great work from the team at Noakie Spec Racing
https://www.facebook.com/NoakieSpecRacing
Awesome kit i have great results form street and track testing. Great price. Has totally transformed the car with combining the rear upgrade and hfm bm57 master.
Plenty of after sales support and fast shipping.
Thanks to HFM. Parts from the Team at
Noakie Spec Racing
Keep up the killa work.
Very quick shipping during pandemic. Allowed me to install straight away
Very simple to install would highly recommend these parts for your silvia
Great quality and fitment, super fast postage. Very happy
Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!
We run these rotors on our race car without any issues at all. Great fit and the overall finish and quality is second to none.
Would recommend these on any street or race application as an upgrade.
A true bolt on product. It is a perfect fit and super simple to install. The finish and overall quality of the product is 10/10.
Everything bolted up just how the instructions guided. Great fitment and easy to install. The only downside is I couldn't justify ordering the whole kit with rotors due to the shipping being high. This should be marketed more in the US since no one is doing it here. 10/10 would recommend to anyone looking into a rotor upgrade on their car. Top marks for this company!
Opting to keep my 17" wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my - and arguably most - 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively.
The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb.
The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle - trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too!
This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing.
Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top.
Great piece of gear HFM, keep up the great work!
These brakes fit under R33 GTR Wheels, 17x9 +22 Advan SA3R's and 17x9 +22 Sparco Crimson.
Very good to deal with
very good and great repsonse times, product feels good
Very good would go through them again
yeah great install havent used them yet but sure they will be great
Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you
Overall an easy install, everything works great and looks fantastic!
Excellent service, fast freight time, will most definitely use again.
Very nice product, fitted perfectly
Leave a Review
Related products
-
5.00(1 Reviews)$ 69.00Brake Master Cylinder Stopper
Suits: Subaru BRZ ZC6, Toyota 86 ZN6 -
$ 231.40Front Braided Brake Lines
Suits: R33 GTS-T, R34 GTT -
$ 130.00Front Hard Line Delete Braided Brake Lines
Suits: R32 GTS-T -
5.00(5 Reviews)$ 449.00326mm Two Piece Front Rotors (SUPERSEEDED)
Suits: Subaru BRZ ZC6 + WRX, Impreza, Forester, Legacy, Liberty
You must be logged in to post a review.