Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide
Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide

Suits S14, S15, R33 GTS-T (Running R33 GTS-T Calipers)

324mm Front Brake Upgrade Kit

From: $ 548.00

Includes Free Shipping
Free Australia Wide Postage on Order $250+
Pickup Available
South Kingsville, VIC 3015 | Ready in 1-2 Hours | Mon - Fri 10am to 4pm
Customise your kit

324mm Front Rotors Suits: R33 GTR, R34 GTR

324mm Rotor Caliper Adapter Brackets Suits: S14, S15, R33 GTS-T

$ 189.00
In Stock

Front Hard Line Delete Braided Brake Lines: S-Chassis

Front Braided Brake Lines: R33 GTS-T

Max Available:

Description

HFM.Parts 324mm Rotors are designed in Australia featuring a striking slot design that matches HFM.Parts Rear Rotors. This rotor has an increase of 28mm from the standard OEM 296mm rotors. This is achieved by using HFM.Parts Australian designed and developed custom caliper adapter set which enables you to use your OEM caliper. Making this a very affordable big brake upgrade kit. The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black painted hub to improve rust resistance and complete the overall look and performance of the rotor.

REPLACEMENTS
We stand by our products. You can purchase replacement HFM.Parts 324mm Rotors without the adapters for a great price, ready when you need them.

DIMENSIONS.
Diameter 324 mm
Height 53.8 mm
Thickness 30 mm
Minimum Thickness 28 mm
Centre Hole 68 mm
Stud Holes 5
Weight 8.9kg/rotor

ADDITIONAL NOTES.
(Optional) To get the most out of this kit we recommend you replace the standard brake pads with DB1346 Brake Pads.

Compatibility

Fitment:
Nissan Silvia/200SX S14
Nissan Silvia/200SX S15
Nissan Skyline R33 GTS-T

Requirements:

Minimum of 17″ Wheels
R33 GTS-T Calipers

S Chassis:
OEM 5 Stud Knuckle
OEM 5 Stud Hub


In the Box

1x Pair HFM.Parts 324mm Rotors
1x Pair HFM.Parts Caliper Adapters
High Tensile Nuts & Bolts for Fitment

FAQs

Q. Will this fit my vehicle? A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits. Q. Why do you recommend to use DB1346 brake pads? A. The DB1346 corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface. Q. What will happen if I use standard brake pads? A. Although you can use your standard brake pads, you will have a 2mm pad overhang. Using DB1346 or equivalent will reduce the overhang. Q. If you stop making these rotors, is there anywhere else I can get them from? A. Yes, these rotors are readily available from most automotive stores. We will continue to produce these rotors and any other products as long as there is a demand. Q. Will these fit my OEM S14, S15, R33 wheels? A.  No, S14, S15 & R33 GTS-T have 16″ wheels as standard. This kit requires a minimum of 17″ wheels. Q. I have an aftermarket caliper, can I still use this rotor kit? A. No, this brake kit has been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers. Q. Can I buy the adapters on their own? A. YES! They are available for purchase as a pair from our website. Q. What material are the adapters made from? A. Our adapters are made using high quality T6-6061 Billet Aluminium. Q. If my rotors wear out, can I buy a replacement set? A. Yes, You are able to purchase a pair of rotors without adapters. Q. Do I have to modify any brake components to use this kit? A. No. Q. Are these rotors directional? A. No, you can install them on either side of your car without affecting performance. Q. Can I use this brake kit if I have a 4 stud hub? A. No, you need a 5 stud hub. Q. Why doesn’t the brake pad cover the entire surface of the rotor? A. This kit works by spacing out your existing calipers, which in turn, the brake pads position will follow, to accommodate for the larger rotor. There are no brake pads (that we’re aware of) that will fit within the original caliper and cover more surface area. Q. I have an S13 with R33 GTS-T calipers, can I use these adapters? A. Yes! But you will need to have OEM 5 stud hubs & knuckles.

Install Guides

 
Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page


Customer Photos
We're yet to upload our customers photos.
Want to be featured here? Send in your best shots: sales@hfm.parts

4.96 Stars
Customer Reviews
28 reviews
    We are currently running the 2 piece brake discs on our endurance race car and they are doing a great job. The weight saving, cooling, reduced replacement cost and the look are all great points as to us returning for more. The team at HFM are knowledgeable on there product and are commited to working through the intricacies of racing with us. GREAT JOB!!
    Blake Morgan
    Using the 2 piece rotors on our endurance car and so far the results are good. Huge weight difference, better cooling, cheaper rotor replacement,and the look is just a bonus. The HFM Team are great with there backup service and comitment to working on some of the more intricacies of a race car. GREAT JOB.
    Blake Morgan
    Worked great but should supply another set of washers, ran into slight clearance issues. Had to stack the older ones to provide just enough clearance
    Kevin ho
    Easy install works perfectly on my track car
    Damien
    Great quality, super light and actual bolt on fitment. Great budget upgrade for a street car!
    Anonymous
    Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag "no biggy had some spares in my garage" and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can't wait to see how they go at my next time attack day.
    Stuart Jackson
    Awesome upgrade and still retaining stock calipers. Combined with the rear brake upgrade and HFM BM57 master cylinder. Great long lasting stopping power we have street and track tested this combo with great results. Its totally transformed the car. Great after sales service cheap as and fast shipping. Thanks to HFM Dot Parts for the killa and ultra simple upgrades keep up the great work from the team at Noakie Spec Racing https://www.facebook.com/NoakieSpecRacing
    Brett Noakes
    Awesome kit i have great results form street and track testing. Great price. Has totally transformed the car with combining the rear upgrade and hfm bm57 master. Plenty of after sales support and fast shipping. Thanks to HFM. Parts from the Team at Noakie Spec Racing Keep up the killa work.
    Brett Noakes
    Very quick shipping during pandemic. Allowed me to install straight away
    Luke Fowler
    Very simple to install would highly recommend these parts for your silvia
    MATTHEW craig
    Great quality and fitment, super fast postage. Very happy
    Andrew Clifton
    Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!
    Austin Mason
    We run these rotors on our race car without any issues at all. Great fit and the overall finish and quality is second to none. Would recommend these on any street or race application as an upgrade.
    Dion Coulls
    A true bolt on product. It is a perfect fit and super simple to install. The finish and overall quality of the product is 10/10.
    Dion Coulls
    Everything bolted up just how the instructions guided. Great fitment and easy to install. The only downside is I couldn't justify ordering the whole kit with rotors due to the shipping being high. This should be marketed more in the US since no one is doing it here. 10/10 would recommend to anyone looking into a rotor upgrade on their car. Top marks for this company!
    Brent Gregory
    Opting to keep my 17" wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my - and arguably most - 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively. The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb. The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle - trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too! This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing. Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top. Great piece of gear HFM, keep up the great work! These brakes fit under R33 GTR Wheels, 17x9 +22 Advan SA3R's and 17x9 +22 Sparco Crimson.
    Steve
    Very good to deal with
    Adrian Oliver
    very good and great repsonse times, product feels good
    Andrew Finn
    Very good would go through them again
    Rodney petrovic
    yeah great install havent used them yet but sure they will be great
    garry stanton
    Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you
    Riley McConaughey
    Overall an easy install, everything works great and looks fantastic!
    Shaun Ewing
    Excellent service, fast freight time, will most definitely use again.
    Stephen Henley
    Very nice product, fitted perfectly
    Alan U.
Leave a Review
Leave a review

Search