350mm Two Piece Rear Brake Upgrade Kit for S/R Chassis with 370Z Akebono Calipers (Intro Price)
350mm Two Piece Rear Brake Upgrade Kit (Intro Price)
From: Original price was: $ 1,259.00.$ 1,101.50Current price is: $ 1,101.50.
Some calipers are hard to find, HFM.Parts have created a rear brake kit for S/R chassis that utilises the more readily available 370Z Akebono calipers. This is made possible with HFM.Parts Australian designed and developed billet aluminium caliper adaptor set. This kit includes HFM.Parts Two Piece rear rotors with a visually stunning slot design and a black-anodised hub to match all HFM.Parts Front Rotors. The rotors are larger, allowing for better heat dissipation, vented for increased ventilation, and the curved indentations improve brake pad cleaning ability.
Dynamically Balanced
Dynamic Balancing involves using advanced machines to rotate the rotors at speed to ensure the rotor’s weight distribution is even. If any imbalance is detected, the technician will remove small portions of material to re-balance the rotor. This process is crucial, especially for high-performance vehicles, as an imbalance can negatively impact brake performance, causing vibrations, noise and unnecessary wear and tear.
Lighter Than OEM
With the design of these Two Piece rotors, there is a weight saving of almost 2kg between the pair! Less unsprung weight means improved and more responsive acceleration.
*Actual saving of 1.94 kg.
Compatibility
![]() | Nissan Make | 180SX SR20 Model | 1991 - 1999 Production | Minimum Requirements | ||
![]() | Nissan Make | Silvia S13 SR20 Model | 1991 - 1993 Production | Minimum Requirements | ||
![]() | Nissan Make | Silvia/200SX S14 Model | 1993 - 2000 Production | Minimum Requirements | ||
![]() | Nissan Make | Silvia/200SX S15 Model | 2000 - 2002 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R32 GTR Model | 1989 - 1994 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R32 GTS-T Model | 1989 - 1994 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R33 GTR Model | 1993 - 1998 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R33 GTS-T Model | 1993 - 1998 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R34 GTR Model | 1998 - 2002 Production | Minimum Requirements | ||
![]() | Nissan Make | Skyline R34 GTT Model | 1998 - 2002 Production | Minimum Requirements | ||
Nissan Skyline R34 GT |
- 1x Pair 370Z Z34 Akebono Calipers
- Minimum Wheel Size of 18″
- S-Chassis, you must convert to R-Chassis components as follows: 5-Stud Hub and Hand Brake Cables and shoes.
- Some modifications are required. See the installation video/guide for info regarding modifications. The video is coming soon.
While not necessary, we always recommend upgrading to braided brake lines.
In the Box
1x Pair HFM.Parts 350mm Two Piece Rear Rotors
1x Pair HFM.Parts Caliper Adapters
High Tensile Nuts & Bolts for Fitment
Optional:
HFM.Parts Braided Brake Lines
FAQs
Install Guides
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page

Our rotors are designed to enhance braking performance compared to stock options, offering a more responsive feel which can reduce brake fade during demanding driving.
The key to this improvement is a larger diameter design, which increases the overall surface area for better heat dissipation. This upgrade is particularly attractive as it retains your stock calipers (unless mentioned otherwise), keeping the cost down while providing a noticeable improvement in braking performance.
Our vane design compliments on both structural integrity and heat dissipation. We’ve positioned our vanes to disrupt airflow across the rotor surface, breaking up the boundary layer of hot air. This turbulence promotes efficient heat transfer which reduces brake fade and ensures the drives has consistent stopping power.


Our rotors feature a custom slot design that’s consistent across our entire range, ensuring a uniform look and optimal performance on all fronts. Slots actively channel away heat, debris, and gasses from the braking surface.
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!