Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide
Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide

Suits S/R Chassis utilising Rear 350Z Brembo Calipers

340mm Rear Brake Upgrade Kit

From: $ 519.00

Includes Free Shipping
Free Australia Wide Postage on Order $250+
Pickup Available
South Kingsville, VIC 3015 | Ready in 1-2 Hours | Mon - Fri 10am to 4pm
Customise your kit

340mm Rear Rotor

$ 310.00
In Stock

340mm Rotor Caliper Adaptor

$ 209.00
In Stock

Rear Braided Brake Line Set

324mm Front Two Piece Rotors for 350Z

Max Available:


Some calipers are hard to find, HFM.Parts have created a rear brake kit for S/R chassis that utilises the more readily available 350Z Brembo calipers. This is made possible with HFM.Parts Australian designed and developed billet aluminium caliper adaptor set. The rotors have a visually stunning slot design and a black-painted hub to match all HFM.Parts Front Rotors. The rotors are larger allowing for better heat dissipation, vented for increased ventilation and the curved indentations improve brake pad cleaning ability.

This kit provides the following upgrades:
S Chassis: 258mm to 340mm Rear Rotors
R Chassis: 297mm to 340mm Rear Rotors
R Chassis GTR: 300mm to 340mm Rear Rotors
With 350Z Rear Brembo Calipers

Weight: 8.6kg/rotor

Use 350Z Brembo Front Calipers and drill out the knuckle holes from M12 to M14 for a super easy front brake upgrade, then match this rear kit with HFM.Parts Front Two Piece Rotors for 350Z.


Nissan 180SX SR20
Nissan Silvia S13 SR20
Nissan Silvia/200SX S14
Nissan Silvia/200SX S15
Nissan Skyline R32 GTR
Nissan Skyline R32 GTS-T
Nissan Skyline R33 GTR
Nissan Skyline R33 GTS-T
Nissan Skyline R34 GTR
Nissan Skyline R34 GTT
Nissan 300ZX Z32

  • 1x Pair of rear Brembo 350Z Calipers
  • Remove/modify the backing plate to accommodate the larger rotor.
  • S-Chassis, you must convert to R-Chassis components as follows: 5-Stud Hub and Hand Brake Cables and shoes.
  • Minimum Wheel Size 18″

While not necessary, we always recommend upgrading to braided brake lines.

In the Box

1x Pair HFM.Parts 340mm Rear Rotors
1x Pair HFM.Parts Caliper Adapters
4x HFM.Parts Custom Shoulder Bolts
High Tensile Nuts & Bolts for Fitment

HFM.Parts Braided Brake Lines
HFM.Parts 324mm Front Two Piece Rotors for 350Z*
*See tip above. If unsure, please ask.

Install Video


Q. Will this fit my vehicle? A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits. Q. I have an R33/R34 GTR that already has Brembo calipers; why would I use this kit? A. In this particular case, the 350Z Brembo caliper is virtually the same as your OEM Brembo caliper, so it wouldn’t be ideal to change it unless it is difficult to find a replacement. We have a 340mm kit for GTR which you can view here, that utilises the OEM Brembo caliper; however, should you decide to swap or use 350Z Brembo calipers, this kit is still suitable.

Install Guides


Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page

Customer Photos

Customer Reviews
No Reviews for 340mm Rear Brake Upgrade Kit – S/R Chassis Yet.

Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!

Leave a Review
Leave a review for “340mm Rear Brake Upgrade Kit – S/R Chassis”