Free Postage Australia wide on order $250+
Fast 24 Hour Dispatch from Melbourne Warehouse
Secure Payments via Mastercard, Visa, AfterPay & PayPal
↑↓ ↵ esc
0
16 parts

Brake Accessories

Bleeding tools, spares for HFM.Parts brake master cylinders, a Wilwood bias valve, Wilwood caliper fittings and brake duct hose. Most parts suit the Skyline, Silvia, 180SX and 300ZX Z32, with bleeder caps and extras for the MX-5, 86 and BRZ.

Free AU shipping over $250 Same-day dispatch before 1PM AEST 2-year warranty

16 parts

In stock

Brake Accessories guide

Bleeding tools

Bench bleed a new brake or clutch master with the EPDM bench bleeding line, in M10 x 1.0 or M12 x 1.0 to match the master outlet. Order one for each outlet. Pressure bleeder caps screw onto the reservoir in place of the lid and take air or a pressure bleeder through a Schrader valve. The 75mm x 3mm cap suits BM44, BM50 and BM57 masters (keep air pressure at 10 psi or less), and the 72mm x 3mm cap suits MX-5 NA and NB masters. For one-person bleeding at the caliper, the M10 x 1.0mm stainless speed bleeder has a check ball that stops air getting back in. It suits most Akebono, Sumitomo and Brembo calipers.

Spares for HFM.Parts brake masters

Keep a BM57 going with the 27mm rebuild kit, a replacement cap or a spare M10 tapered grub screw for the ABS port. The BM57 reservoir relocation kit moves the reservoir for engine swaps. The BMZ33 has its own M12 grub screw. When you fit any HFM.Parts brake master, the push rod adjusting tool sets booster push rod clearance. On a RHD 86 ZN6 or BRZ ZC6, the master cylinder stopper braces the master against firewall flex.

Bias, Wilwood fittings and cooling

The Wilwood 260-12627 bias valve has M10 x 1 bubble-flare ports to suit Nissan brake plumbing and cuts rear line pressure by up to 57%. Our 1/8″ NPT to M10 x 1.0mm stainless fittings convert Wilwood caliper inlets to metric lines, and come with every HFM.Parts brake kit that uses Wilwood calipers. For brake cooling, the 3″ silicone brake duct hose is rated to 310°C and sold in 2m or 4m lengths.

Frequently asked questions

Which pressure bleeder cap fits my brake master cylinder?

The 75mm x 3mm pressure bleeder cap fits BM44, BM50 and BM57 brake masters on the Skyline, Silvia, 180SX and 300ZX Z32. Keep air pressure at 10 psi or less. The 72mm x 3mm cap fits the Mazda MX-5 NA and NB brake master.

What size bench bleeding line do I need for my brake or clutch master cylinder?

Match the thread on the master cylinder outlet: the HFM.Parts EPDM bench bleeding line comes in M10 x 1.0mm or M12 x 1.0mm and suits both brake and clutch masters. Order one line for each outlet on the master.

Will the Wilwood 260-12627 bias valve plumb into Skyline or Silvia brake lines?

Yes. The Wilwood 260-12627 bias valve has M10 x 1 bubble-flare inlet and outlet ports to suit Nissan brake plumbing, including the Skyline, Silvia, 180SX and 300ZX Z32. The knob adjusts front-to-rear balance and cuts rear line pressure by up to 57%.

HFM.Parts, an auto parts brand that specialises in Japanese sports car parts with a whole new level of performance and reliability.
Policies
Warranties Privacy Cookies Terms Cookie settings
Help
Returns Distributors FAQs Work @ HFM
For You
My Account Install Guides Contact Us
HFM.Parts manufacture and sell parts for off-road use only, are not street-legal and do not conform to Australian road laws or ADR Laws unless specified otherwise. Learn about our Warranty or read our full Terms & Conditions.
© 2016 - 2026 HFM.Parts. All Rights Reserved.

BrakesRotors to pads

CylindersBrake and clutch

Clutch & Driveline

Braided Clutch Lines

Wheels & Chassis

Forged WheelsWheel SpacersWheel Studs & NutsHub RingsSuspension & Chassis

Engine & Interior

Engine BayInterior & StylingSafetyFire Extinguisher BracketsMerch

Deals & Spares

Scratch & SaveReplacement Parts

More

Install GuidesArticlesOur StoryFAQsSupport
↑↓ ↵ esc