Wilwood Caliper Inlet Fittings, NPT to M10 (Pair)
Suits: Wilwood calipers with a 1/8"-27 NPT inlet, including those in HFM.Parts brake kits
Run metric brake lines to Wilwood calipers. A pair of fittings to convert both caliper inlets to M10 x 1.0mm.
- 1/8″-27 NPT tapered thread into the caliper
- M10 x 1.0mm female thread for the brake line
- 304 stainless steel
- Included in all HFM.Parts brake kits with Wilwood calipers
$36.00 AUD
Inclusions
-
Wilwood Caliper Conversion Brake Fitting × 2 (Pair)
In stock
WF1/8-M10
$36.00
Requirements
What it’s for
Wilwood calipers use an imperial 1/8″ NPT inlet. These fittings convert the caliper’s side inlet to M10 x 1.0mm, so you can run metric brake lines. They’re included in all our brake kits with Wilwood calipers.
Will it fit?
They suit Wilwood calipers with a 1/8″-27 NPT inlet. They can also be used in other applications. Check the thread sizes and dimensions in the specifications and the diagram in the product photos.
We recommend installation by a licensed mechanic.
Specifications
| Caliper end | 1/8″-27 NPT tapered male thread |
|---|---|
| Line end | M10 x 1.0mm female thread |
| Material | 304 stainless steel |
| Female section length | 10.30mm |
| Hex height | 5.00mm |
| NPT thread length | 10.00mm |
| Unit of sale | Pair |
Pairs with
What's Included
-
2× 1/8"-27 NPT to M10 x 1.0mm brake fitting, 304 stainless steel
Customer Installs
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!