-
Wilwood Brake Bias Valve 260-12627
Suits: Nissan Skyline R32, R33, R34, Silvia S13, S14, S15, 180SX, 300ZX Z32 and other cars with M10 x 1 bubble-flare lines
$110.00 AUD -
BM50 1" (25.4mm) Brake Master Cylinder for Skyline, Silvia & 300ZX
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GT, GTT, Silvia S13, S14, S15, 180SX, 300ZX Z32 (RHD, ABS & Non-ABS)
$279.00 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
M10 x 1.0mm Caliper Speed Bleeder Valve
Suits: calipers with an M10 x 1.0 bleeder thread, including most Akebono, Sumitomo and Brembo calipers
$19.95 AUD -
Black Cotton Crew Neck Tee
100% Cotton for breathable, comfort
$26.95 AUD -
3" Silicone Brake Duct Hose
Suits: Universal fit. Any brake cooling setup running 3" (76mm) duct.
Price range: $79.00 through $149.00 AUD -
Bench Bleeding Line for Brake & Clutch Masters
Suits: brake and clutch master cylinders with M10 x 1.0 or M12 x 1.0 outlets
$25.00 AUD -
Wilwood Forged Superlite Caliper 120-11133 (Pair)
Suits: 1.25" wide rotors up to 13.06" diameter, lug mount on 3.50" centres
Price range: $825.00 through $1,099.00 AUD -
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
Open-Ended Multi Hex Lock Nut Set
Suits: M12 x 1.25 or M12 x 1.5 studs with a 60° taper seat (universal fit)
$39.95 AUD -
Wilwood Brake Pads for Caliper 120-13839
Suits: Wilwood Forged Dynalite caliper 120-13839
Price range: $155.00 through $275.00 AUD -
Wilwood Forged Dynalite Caliper 120-13839 (Pair)
Suits: 0.81" wide rotors, 10.00" to 13.06" diameter, lug mount on 5.25" centres
Price range: $599.00 through $890.00 AUD -
TR43E Aluminium Schrader Tyre Valves (Set of 4)
Suits: wheels with an 11.5mm valve hole (universal fit)
$14.95 AUD -
Adjustable Clutch Slave Push Rod (49mm / 52mm)
Suits: HFM.Parts big bore clutch slaves BBCS-RB-AR (49mm) and BBCS-PT (52mm), plus other slaves by size chart
$15.99 AUD -
Brake & Clutch Reservoir Sweatband
Suits: most brake and clutch master cylinder reservoirs (Small 30 x 30mm or Large 60 x 70mm)
$8.00 AUD -
337mm V2 Rear Rotors for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo, with HFM.Parts 337mm adapters, 17" wheels minimum)
$379.00 AUD -
Brake Booster Push Rod Adjusting Tool
Suits: all HFM.Parts brake master cylinders and most brake boosters with an adjustable push rod
$39.00 AUD -
Wilwood Brake Pads for Superlite 120-11134 & 120-11133
Suits: Wilwood Forged Superlite calipers 120-11134 and 120-11133
Price range: $215.00 through $299.00 AUD -
Wilwood Forged Superlite Caliper 120-11134 (Pair)
Suits: 0.81" wide rotors, 11.75" to 13.06" diameter, lug mount on 3.50" centres
Price range: $799.00 through $1,099.00 AUD -
75mm Pressure Bleeder Cap for BM Series Brake Masters
Suits: BM series brake master cylinders with a 75mm x 3mm reservoir thread (BM44, BM50, BM57), including HFM BM50 and BM57
$25.00 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$3.95 AUD -
350mm Two-Piece Rear Brake Kit for S/R Chassis (370Z Akebono)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GT, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 370Z Akebono or Infiniti G37, Q60, Q70 rear calipers
$1,108.00 AUD -
350mm Rear Caliper Adapters for S/R Chassis (370Z Akebono)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GT, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 370Z Akebono or Infiniti G37, Q60, Q70 rear calipers
$209.00 AUD -
R34 Gear Shifter & Handbrake Boot Set
Suits: Nissan Skyline R34 GT, R34 GTT
$99.00 AUD -
354mm Akebono Caliper Adaptor Brackets for R34 GTT
Suits: Nissan Skyline R34 GTT with 370Z Z34 front Akebono calipers and 354mm rotors (minimum 18" wheels)
$239.00 AUD -
Front Braided Brake Lines for 354mm Akebono Kit
Suits: Nissan Skyline R34 GTT, R33 GTS-T with the HFM.Parts 354mm Akebono brake kit or adaptor brackets
$259.00 AUD -
340mm Rear Caliper Adapters for S/R Chassis (350Z Brembo)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 350Z rear Brembo calipers and HFM.Parts 340mm rear rotors
$225.00 AUD -
340mm Rear Brake Kit for S/R Chassis (350Z Brembo)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 350Z rear Brembo calipers
$624.00 AUD -
13/16" Big Bore Pull-Type Clutch Slave Cylinder
Suits: Nissan Skyline R32 GTR (Feb 1993 on), R33 GTR, R34 GTR, R34 GTT, Stagea WGNC34 260RS & RS-Four (pull-type only)
$159.00 AUD -
324mm Front Brake Upgrade Kit for R34 GTT
Suits: Nissan Skyline R34 GTT with factory calipers (minimum 17" wheels)
$608.00 AUD -
324mm Caliper Adaptor Brackets for R34 GTT
Suits: Nissan Skyline R34 GTT with factory calipers (minimum 17" wheels)
$209.00 AUD -
BM57 Brake Master Reservoir Relocation Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$119.00 AUD -
Durable Vinyl Car Stickers
Share the Love
Price range: $2.95 through $3.59 AUD -
18x9.5" +22 R32 GTR V-Spec Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 350Z, 370Z
$1,945.00 AUD -
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD -
18x9.5" +22 Monoblock Forged Wheels - R33 GTR Styled (Set of 4)
5x114.3 PCD Suits: Skyline, Silvia, Z-Chassis
$1,945.00 AUD -
18x9" +25 R33 GTR Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 180SX, 350Z, 370Z
$1,945.00 AUD -
18x9" +25 R32 GTR Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 180SX, 350Z, 370Z
$1,945.00 AUD -
Open-Ended Lug Nuts, M12 x 1.25 & 1.5 (Set of 20)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$69.00 AUD
Nissan · 1998–01
Skyline R34 GTT
Parts for the Nissan Skyline R34 GTT (ER34). Our 324mm front brake kit keeps the factory front calipers, and the 354mm front brake kit runs 370Z Akebono calipers on 18-inch wheels. The R34 GTT uses a pull-type clutch slave: we stock a big bore pull-type slave and a direct-replacement clutch master cylinder.
Free AU shipping over $250
Same-day dispatch before 1PM AEST
2-year warranty
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/22/Lug-Nuts-20x-600x480.jpg)
