12mm Steering Rack Spacers for MX-5 NA
Suits: Mazda MX-5 NA
Less bump steer on a lowered NA. Raises the steering rack 12mm in about 15 minutes.
- Raises the steering rack 12mm
- Reduces bump steer on lowered cars
- Bolts in, about 15 minutes to fit
- Billet spacers, hardware included
$79.00 AUD
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
Requirements
Why upgrade
Lower an MX-5 NA and the steering rack no longer sits where the factory set it. That misalignment causes bump steer.
These billet spacers raise the steering rack by 12mm to bring the geometry back towards the factory setting. It’s a quick, affordable fix that bolts in with no complex changes, and it looks tidy under the car.
For the full explanation, read a solution for bump steer: steering rack spacers.
Specifications
| Suits | Mazda MX-5 NA |
|---|---|
| Rack raise | 12mm |
| Spacers | Billet, pair |
| Bolt torque | 33-40Nm (25-30 ft-lb) |
| Fitting time | About 15 minutes |
| Country of origin | Australia |
Fitting
The spacers fit underneath the two steering rack D-clamps, using the supplied bolts. Tighten the bolts evenly and torque to 33-40Nm (25-30 ft-lb).
Camber and toe will change, so get a wheel alignment after fitting. Follow the step-by-step install guide.
We recommend installation by a licensed mechanic.
Pairs with
- High tensile eccentric camber bolts for MX-5: hold your alignment settings.
- Billet Aluminium T6 6061
- 15 Min Install
What's Included
-
2× Billet spacers
-
3× 35mm hex head bolts
-
1× 75mm hex head bolt
-
1× Bolt spacer sleeve
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!