Scratch & Save 354mm Akebono Caliper Adapter Brackets for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with 370Z Z34 front Akebono calipers and 354mm rotors (minimum 18" wheels)
Our 354mm Akebono caliper adapter brackets for the 350Z and V35, at a Scratch & Save price.
- Scratch & Save: minor marks from fitment
- Original bolt kit included (used)
- Steps up from 324mm to 354mm front rotors
- T6-6061 billet aluminium with stainless steel Heli-Coils
$219.00 AUD
Requirements
Discounted for minor cosmetic imperfections
Fully functional, performance unaffected. Sold as photographed.
- Photos The gallery shows the exact unit you receive. Minor marks may not all be visible — ask if unsure.
- Returns Not accepted on Scratch & Save items, except under warranty.
- Warranty Full standard warranty still applies.
Scratch & Save
This is a Scratch & Save pair of our 354mm front caliper adapter brackets for 350Z and V35 (Z33AKE354). They have minor marks from fitment and come with the original bolt kit, used.
Will it fit my car?
Built for the Nissan 350Z Z33 and Skyline V35, stepping up from the factory 324mm rotors to 354mm. You’ll also need:
- HFM.Parts 354mm front two-piece rotors (Z3544932) or an OEM 370Z equivalent
- A pair of 370Z Z34 front Akebono calipers
- Longer braided brake lines, such as our front braided brake lines for 350Z and V35
- 18″ wheels or larger
A small section of the backing plate needs to be cut away to clear the bigger caliper.
Specifications
| Condition | Scratch & Save: minor marks from fitment |
|---|---|
| Upgrade | 324mm to 354mm front rotors |
| Bracket material | T6-6061 billet aluminium, hard anodised |
| Thread inserts | Stainless steel Heli-Coils |
| Rotors | HFM.Parts 354mm two-piece (Z3544932) or OEM 370Z equivalent |
| Calipers | 370Z Z34 front Akebono |
| Wheel size | 18″ minimum |
| Bolt torque | 58–62 ft-lb |
| Position | Front |
| Sold as | Pair (left and right) |
Fitting
Clean any rust off the hub face before fitting the rotor, and trim the backing plate to clear the caliper. Use Loctite 262 or equivalent on all bolts and torque the adaptor and caliper bolts to 58–62 ft-lb. Full steps and a backing plate cutting guide are in the Z33AKE354 adaptor install guide.
We recommend installation by a licensed mechanic.
Pairs with
- 354mm front two-piece rotors
- Front braided brake lines for 350Z and V35
- 354mm front caliper adapter brackets for 350Z and V35 (full-price, with a new bolt kit)
What's Included
-
2× Caliper adapter bracket (left and right)
-
1× Original bolt kit (used)
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Install Guides
Complete the kit
This part comes in these kits — everything you need in one order, at a kit price.
-
354mm Two-Piece Front Brake Kit for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with 370Z Z34 front Akebono calipers (minimum 18" wheels)
$968.00 AUD
Pairs with
Parts other customers fitted with this one, filtered to the same vehicles.
-
Front Braided Brake Lines for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 (2002-2009)
$219.00 AUD -
324mm Two-Piece Front Rotors for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with factory Brembo front calipers, or Wilwood 120-11133 calipers on our adaptor brackets
$749.00 AUD -
Rear Braided Brake Lines for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 (2002-2009)
$149.00 AUD -
324mm Wilwood Front Brake Kit for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35, with or without factory Brembo calipers (17" wheels minimum)
$2,253.00 AUD -
354mm Two-Piece Front Brake Kit for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with 370Z Z34 front Akebono calipers (minimum 18" wheels)
$968.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
324mm Wilwood Caliper Adaptor Brackets for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with Wilwood 120-11133 calipers and 324mm rotors (17" wheels minimum)
$209.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
