324mm Wilwood Caliper Adaptor Brackets for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 with Wilwood 120-11133 calipers and 324mm rotors (17" wheels minimum)
Run Wilwood Superlite calipers over 324mm rotors on your 350Z or V35. Bolts to the factory knuckle.
- Suits Wilwood Forged Superlite 120-11133 calipers
- For 324mm front rotors
- T6-6061 billet aluminium, hard anodised, with stainless steel Heli-Coils
- Sold as a pair with bolts and washers
$209.00 AUD
Requirements
Why upgrade
These brackets mount Wilwood Forged Superlite 120-11133 4-piston calipers over 324mm front rotors on the 350Z and V35. Non-Brembo cars go from the factory 296mm rotor to 324mm. Brembo cars get another caliper option, which may be easier to find or more affordable than a factory Brembo.
They are machined from T6-6061 billet aluminium, hard anodised, with stainless steel Heli-Coils in the threads.
What you need
- Wilwood Forged Superlite 120-11133 calipers (pair)
- 324mm front rotors, such as our 324mm two-piece front rotors for 350Z and V35
- Longer braided brake lines, such as our front braided brake lines for 350Z and V35
- Wilwood caliper conversion fittings if your lines use a metric banjo
- 17″ wheels or larger
Want it all in one box? The 324mm Wilwood front brake kit includes these brackets, rotors, calipers, lines, fittings and pads.
Specifications
| Rotor size | 324mm |
|---|---|
| Calipers | Wilwood Forged Superlite 120-11133 |
| Material | T6-6061 billet aluminium, hard anodised |
| Threads | Stainless steel Heli-Coils |
| Marking | Left and right |
| Bracket bolt torque | 58–62 ft-lb |
| Caliper bolt torque | 50–59 ft-lb |
| Wheel size | 17″ minimum |
| Position | Front |
| Sold as | Pair, with bolt kit |
Fitting
Clean the hub face of dirt and rust before fitting the rotor. The brackets are marked L and R. Fit each bracket to the outside of the knuckle, with the HFM.Parts logo and part number facing in, using the M14 bolts and 28mm washers. Torque to 58–62 ft-lb.
Fit the Wilwood caliper with the 7/16″ bolts and 22mm washers, torqued to 50–59 ft-lb. Test fit the caliper to the bracket first. If any casting material on the caliper meets the bracket, linish it back until the bolt holes line up. This takes 5 to 10 minutes.
The Wilwood caliper inlet is 1/8-27 NPT. With HFM.Parts brake lines, or any line with a metric banjo, fit a Wilwood conversion fitting with thread sealant. Factory brake lines do not suit this setup.
Full steps are in the 324mm front brake kit install guide.
We recommend installation by a licensed mechanic.
Pairs with
- Uses Wilwood Superlite Caliper
- Increase Rotor Size by up to 28mm
- High-Quality Billet Adaptor
What's Included
-
2× HFM.Parts 324mm caliper adaptor bracket (left and right)
-
2× M14 x 1.5 x 45mm hex bolt
-
2× 7/16" x 20 TPI x 1 1/4" hex bolt
-
2× 28mm OD x 2.0mm washer
-
2× 22mm OD x 1.6mm washer
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!