Front Braided Brake Lines for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35 (2002-2009)
Lose the spongy pedal. Braided front brake lines for the 350Z and V35, sold as a pair.
- Stronger than factory rubber lines, for a firmer pedal feel
- Slightly longer than standard to suit our big brake kits
- Complies with FMVSS 106, DOT, TUV and ADR
- Made in Melbourne, no modifications required
$219.00 AUD
Requirements
Why upgrade
Factory rubber brake lines can leave the pedal feeling spongy. These braided lines are stronger than the OEM rubber, which takes that spongy feel out of the pedal so it stays firm and consistent.
They’re slightly longer than standard to allow for bigger rotors. The factory front lines are too short for our 354mm front brake upgrade kit, so these are the lines to run with it. They’re a direct replacement for the factory front lines, with no modifications required.
Standards
Made in Melbourne and compliant with FMVSS 106, DOT, TUV and ADR specifications. FMVSS 106 testing includes:
- 370lb (168kg) pull test
- 35-hour whip test
- 7,000psi burst test
- -45°C to 146°C temperature test
- 24-hour salt corrosion resistance test
Specifications
| Position | Front |
|---|---|
| Unit of sale | Pair |
| Line type | Braided brake line |
| Length | Slightly longer than standard, to suit bigger rotors |
| Standards | FMVSS 106, DOT, TUV, ADR |
| Fitment | No modifications required |
| Suits | Nissan 350Z Z33, Skyline V35 (2002-2009) |
| Made in | Melbourne, Australia |
| SKU | Z33X-BRKE-F |
Fitting
Swap out the factory rubber lines for the braided lines. Bleed the brakes with fresh fluid until the pedal is firm, then check every fitting for leaks before driving.
We recommend installation by a licensed mechanic.
Pairs with
- Rear braided brake lines for 350Z and V35
- 354mm two-piece front brake upgrade kit for 350Z and V35 (370Z Akebono calipers)
- 324mm front rotor kit for 350Z and V35
- 27mm high volume brake master cylinder for 350Z and V35 (factory Brembo cars)
What's Included
-
1× Front braided brake lines (pair)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!