Free Postage Australia wide on order $250+
Fast 24 Hour Dispatch from Melbourne Warehouse
Secure Payments via Mastercard, Visa, AfterPay & PayPal
↑↓ ↵ esc
0
29 parts

Wheels & Components

HFM.Parts forged wheels, wheel spacers, wheel studs and nuts and hub rings, designed in-house in Australia for the Skyline, Silvia, 180SX, 350Z, 86, BRZ, Subaru WRX and MX-5.

Free AU shipping over $250 Same-day dispatch before 1PM AEST 2-year warranty

6 parts fit XV

Fits XV

Wheels & Components guide

Start with your PCD and hub bore

Two numbers decide what fits: the stud pattern (PCD) and the hub bore. Nissan Skylines, Silvias and the 350Z and 370Z run 5×114.3. The Toyota 86 ZN6, Subaru BRZ ZC6 and older Subarus run 5×100 on a 56.1mm hub. The MX-5 NA, NB and ND are 4×100 on a 54.1mm hub. Every product page lists the PCD, bore and fitment, so check them against your car before you order.

What is in this range

  • Forged Wheels: 18″ monoblock forged wheels in R32 GTR, R33 GTR, V-Spec and Omori styles, plus the 5×100 Movimento for the 86 and BRZ.
  • Wheel Spacers: slip-on, hub centric and 5×100 to 5×114.3 conversion spacers in 6061-T6 aluminium.
  • Wheel Studs & Nuts: 60mm bullnose extended studs, open-ended lug nuts and lock nut sets in M12 x 1.25 and M12 x 1.5.
  • Hub Rings: billet aluminium rings that centre a wheel with a larger bore on your hub.

Parts that work together

Spacers change how much thread your wheel nuts have to grab. Our 12mm and 15mm slip-on spacers need extended studs, while the 3mm and 5mm spacers go over your factory studs. Open-ended lug nuts let a longer stud pass straight through. If your aftermarket wheels have a bigger centre bore than your hub, a pair of hub rings keeps them centred. Finish the job with our TR43E aluminium tyre valves.

Frequently asked questions

What stud pattern and hub bore does my car need for wheels, spacers and hub rings?

Nissan Skylines, Silvias and the 350Z and 370Z run 5×114.3. The Toyota 86 ZN6, Subaru BRZ ZC6 and older Subarus run 5×100 on a 56.1mm hub, and the MX-5 NA, NB and ND run 4×100 on a 54.1mm hub. Every HFM.Parts product page lists its PCD, bore and fitment.

Do I need extended wheel studs if I fit wheel spacers?

It depends on the spacer thickness. HFM.Parts 12mm and 15mm slip-on wheel spacers need extended wheel studs, while the 3mm and 5mm slip-on spacers go over your factory studs. Open-ended lug nuts let a longer stud pass straight through for more thread contact.

Do I need hub rings with aftermarket wheels?

You need hub rings when your aftermarket wheels have a bigger centre bore than your car's hub. A pair of HFM.Parts hub rings fills the gap so the wheel sits centred, with the ring ID matched to your hub and the OD matched to the wheel's centre bore.

HFM.Parts, an auto parts brand that specialises in Japanese sports car parts with a whole new level of performance and reliability.
Policies
Warranties Privacy Cookies Terms Cookie settings
Help
Returns Distributors FAQs Work @ HFM
For You
My Account Install Guides Contact Us
HFM.Parts manufacture and sell parts for off-road use only, are not street-legal and do not conform to Australian road laws or ADR Laws unless specified otherwise. Learn about our Warranty or read our full Terms & Conditions.
© 2016 - 2026 HFM.Parts. All Rights Reserved.

BrakesRotors to pads

CylindersBrake and clutch

Clutch & Driveline

Braided Clutch Lines

Wheels & Chassis

Forged WheelsWheel SpacersWheel Studs & NutsHub RingsSuspension & Chassis

Engine & Interior

Engine BayInterior & StylingSafetyFire Extinguisher BracketsMerch

Deals & Spares

Scratch & SaveReplacement Parts

More

Install GuidesArticlesOur StoryFAQsSupport
↑↓ ↵ esc