12mm / 15mm Slip-On Wheel Spacers, 5x100 or 5x114.3
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and Subaru Impreza, WRX, Forester, Legacy, Outback, XV (5x100 or 5x114.3, 56.1mm hub, extended studs required)
Push your wheels out 12mm or 15mm. One spacer is drilled for both 5×100 and 5×114.3, and slides straight over your studs.
- Slip-on, no PCD change: 5×100 or 5×114.3
- 56.1mm centre bore
- 12mm or 15mm, sold as a pair
- Needs extended wheel studs
![multi fit slip on wheel spacers 5x100 or 5x112 pcd 57.1 hub (pair) [discontinued]](https://www.hfm.parts/wp-content/uploads/58/Main-Image-12mm-SO-900x600.jpg)
Price range: $71.00 through $77.00 AUD
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
Requirements
What it does
A slip-on spacer pushes the wheel out by its thickness without changing your stud pattern. It slides over the hub and your wheel studs, then the wheel bolts on over it. These are drilled for both 5×100 and 5×114.3, so one spacer covers both patterns.
Will it fit my car?
- PCD: 5×100 or 5×114.3. The spacer doesn’t convert between them.
- Hub: 56.1mm.
- Wheel studs: at 12mm and 15mm you need extended wheel studs.
Want a smaller change with factory studs? See our 3mm and 5mm multi-fit slip-on spacers.
Specifications
| Type | Slip-on, multi-fit |
|---|---|
| PCD | 5×100 or 5×114.3 (drilled for both, no conversion) |
| Centre bore | 56.1mm |
| Thickness | 12mm or 15mm |
| Wheel studs | Extended studs required |
| Material | 6061-T6 aluminium, hard anodised matte black |
| Torque | 89 ft-lb (120 Nm) |
| Sold as | Pair |
Fitting
Fit extended wheel studs first. Slide the spacer over the hub and studs, fit the wheel, then torque to 89 ft-lb (120 Nm), the factory setting. Going higher risks stripping the stud.
Wheel spacers are sold for off-road use only. We recommend installation by a licensed mechanic.
Pairs with
- BullNose extended wheel studs for 86 and BRZ, 11mm more thread than the standard studs
- single M12 x 1.25 x 60mm BullNose extended stud
- open-ended lug nuts (set of 20), M12 x 1.25
PCD – 5 x 100mm or 114.3mm
HUB – 56.1mm
OD – 150mm
Bolt Type – M12 x 1.25
NOTE: This is a Multi Hole Spacer. This spacer will fit either PCD size listed above.
What's Included
-
2× Multi-fit slip-on wheel spacer, 5x100 / 5x114.3
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!