Scratch & Save 5x100 to 5x114.3 Hub Centric Conversion Spacers, 66.1mm Hub, 15mm
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru with a 56.1mm hub (5x114.3 wheels, 66.1mm centre bore)
Our 5×100 to 5×114.3 hub centric conversion spacers (66.1mm hub), 15mm, at a Scratch & Save price.
- Scratch & Save: cosmetic marks from fitment
- Converts 5×100 PCD to 5×114.3 PCD
- Hub centric: 56.1mm hub bore, 66.1mm hub spigot
- 15mm thick, 6061-T6 aluminium
$114.00 AUD
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
Requirements
Discounted for minor cosmetic imperfections
Fully functional, performance unaffected. Sold as photographed.
- Photos The gallery shows the exact unit you receive. Minor marks may not all be visible — ask if unsure.
- Returns Not accepted on Scratch & Save items, except under warranty.
- Warranty Full standard warranty still applies.
Scratch & Save
This is a Scratch & Save pair of our 5×100 to 5×114.3 hub centric conversion spacers (66.1mm hub), 15mm thick. They have cosmetic marks from fitment.
What it does
These spacers bolt to your 5×100 hub and carry their own 5×114.3 studs, so you can run 5×114.3 wheels. The wheel side has a 66.1mm hub spigot to centre wheels with a 66.1mm centre bore. They also push the wheel out by 15mm.
Will it fit my car?
Check two things:
- Your car: 5×100 PCD with a 56.1mm hub, like the Toyota 86 ZN6, Subaru BRZ ZC6 and 5×100 Subarus.
- Your wheels: 5×114.3 PCD with a 66.1mm centre bore.
Specifications
| Condition | Scratch & Save: cosmetic marks from fitment |
|---|---|
| Type | Hub centric, bolt-on conversion |
| Converts | 5×100 PCD to 5×114.3 PCD |
| Hub side (car) | 56.1mm centre bore |
| Wheel side | 66.1mm hub spigot |
| Thickness | 15mm |
| Outside diameter | 150mm |
| Stud thread | M12 x 1.25 |
| Hardware | 10.9 grade |
| Material | 6061-T6 aluminium, hard anodised matte black |
| Torque | 89 ft-lb (120 Nm) |
| Sold as | Pair |
Fitting
The spacer bolts to your hub with the supplied 10.9 grade hardware, then your wheel bolts to the spacer. Check your factory studs don’t stand proud of the spacer face. If they do, trim them so the wheel sits flush.
Torque to 89 ft-lb (120 Nm), the factory setting. Going higher risks stripping the stud from the spacer.
Wheel spacers are sold for off-road use only. We recommend installation by a licensed mechanic.
Pairs with
- open-ended lug nuts (set of 20), M12 x 1.25
- 5×100 to 5×114.3 hub centric conversion spacers (66.1mm hub) (full-price, 15mm to 30mm)
When installing HFM.Parts Wheel Spacers, we recommend using a square hex socket to ensure a snug fit which will prevent rounding the corners of the nut. Do not use an air ratchet, always tighten the nuts by hand and then torque to 80-86 ft lb’s.
What's Included
-
2× Hub centric conversion wheel spacer, 5x100 to 5x114.3, 15mm
-
1× 10.9 grade fitting hardware
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Recommended for you
Other options in this range for the same vehicles.
-
15mm Hub Centric Wheel Spacers, 5x100, 56.1mm Hub
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru Impreza, WRX, Forester, Legacy, Outback, XV (56.1mm hub)
$139.00 AUD -
5x100 to 5x114.3 Hub Centric Conversion Spacers, 56.1mm Hub
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru Impreza, WRX, Forester, Legacy, Outback, XV (56.1mm hub)
Price range: $147.00 through $179.00 AUD -
12mm / 15mm Slip-On Wheel Spacers, 5x100 or 5x114.3
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and Subaru Impreza, WRX, Forester, Legacy, Outback, XV (5x100 or 5x114.3, 56.1mm hub, extended studs required)
Price range: $71.00 through $77.00 AUD -
3mm / 5mm Slip-On Wheel Spacers, 5x100 or 5x114.3
Suits: Toyota 86 ZN6, GR86 ZN8, Subaru BRZ ZC6, ZD8, Impreza, WRX, WRX STI (5x100 or 5x114.3)
Price range: $52.00 through $57.00 AUD
![multi fit slip on wheel spacers 5x100 or 5x112 pcd 57.1 hub (pair) [discontinued]](https://www.hfm.parts/wp-content/uploads/58/Main-Image-12mm-SO-600x400.jpg)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
