326mm Caliper Adapter Brackets for 86 & BRZ
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 (Wilwood 120-11573 or 120-11133 calipers, 326mm rotors)
Run Wilwood calipers over 326mm rotors on your 86 or BRZ. The same brackets we use in our 326mm front brake package.
- Suits Wilwood 120-11573 and 120-11133 calipers
- For 326mm rotors (Subaru WRX 2000–2019 size)
- T6-6061 billet aluminium, black anodised
- Stainless steel Heli-Coils, sold as a pair
$209.00 AUD
Requirements
Why upgrade
These brackets let you mount Wilwood calipers over 326mm front rotors on the 86 and BRZ. They’re the same brackets that go in our 326mm front brake package, sold on their own if you’re putting your own setup together.
They’re machined from T6-6061 billet aluminium, black anodised, with stainless steel Heli-Coils in the threads.
Will it fit my car?
They suit the Toyota 86 ZN6 and Subaru BRZ ZC6. They don’t suit the aluminium knuckles on the 2022-on BRZ ZD8. For that car, use our 326mm adapter brackets for BRZ ZD8.
You also need 326mm rotors (the Subaru WRX 2000–2019 size), Wilwood 120-11573 or 120-11133 calipers, and 17″ wheels or larger.
Specifications
| Rotor size | 326mm (Subaru WRX 2000–2019 size) |
|---|---|
| Calipers | Wilwood 120-11573 (Forged Dynalite) or 120-11133 (Forged Superlite) |
| Material | T6-6061 billet aluminium, black anodised |
| Threads | Stainless steel Heli-Coils |
| Wheel size | 17″ minimum |
| Position | Front |
| Sold as | Pair |
Fitting
If you’re running HFM.Parts brake lines, or any lines with a metric banjo fitting, you need Wilwood caliper conversion fittings to connect them to the Wilwood caliper. They convert the caliper side inlet from imperial to metric.
Watch the 326mm front brake package install video to see the full fit. We recommend installation by a licensed mechanic.
Pairs with
- 326mm two-piece front rotors
- Front braided brake lines for the 326mm package, longer to suit the bigger rotor
- Wilwood caliper conversion fittings (pair)
- 326mm caliper adapter package: these brackets and the braided lines together
- 326mm front brake package with Wilwood calipers, rotors, brackets and lines
What's Included
-
2× 326mm caliper adapter bracket for Wilwood calipers
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Based on 5 verified reviews