Front Braided Brake Lines for 326mm Brake Package
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 with the HFM.Parts 326mm front brake package or adapter brackets
The extra length your 326mm brake upgrade needs, with a firmer pedal than rubber lines.
- Longer than standard to suit the bigger rotor
- Made for our 326mm package and adapter brackets
- Made in Melbourne
- Meets FMVSS 106, DOT, TUV and ADR
$189.00 AUD
Requirements
Why upgrade
These lines are made for our 326mm front brake package and 326mm caliper adapter brackets. They’re slightly longer than standard to suit the bigger rotor. Braided lines are stronger than the factory rubber lines, so the pedal feels firmer and less spongy.
Built to the standard
Made in Melbourne and compliant with FMVSS 106, DOT, TUV and ADR. FMVSS 106 testing includes:
- 370lb (168kg) pull test
- 35-hour whip test
- 7000psi burst test
- -45°C to 146°C temperature test
- 24-hour salt corrosion resistance test
Will it fit my car?
They suit the Toyota 86 ZN6 and Subaru BRZ ZC6 running our 326mm package or adapter brackets. Running the factory brakes? Use our front braided brake lines for 86 and BRZ.
Specifications
| Type | Braided brake lines |
|---|---|
| Position | Front |
| Length | Longer than standard to suit the 326mm rotor |
| Suits | HFM.Parts 326mm front brake package or adapter brackets |
| Standards | FMVSS 106, DOT, TUV, ADR |
| Made in | Melbourne, Australia |
Fitting
If you’re running HFM.Parts brake lines, or any lines with a metric banjo fitting, you need Wilwood caliper conversion fittings to connect them to the Wilwood caliper. They convert the caliper side inlet from imperial to metric. They’re included in the 326mm front brake package.
Bleed the brakes fully after fitting. We recommend installation by a licensed mechanic.
Pairs with
What's Included
-
1× Front braided brake lines (left and right)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!