Bull Nose Extended Wheel Stud for MX-5 NA, NB, NC, ND, Abath 124
Bull Nose Extended Wheel Studs
$ 4.90
HFM.Parts BullNose Extended Wheel Studs help to accommodate for the loss of thread you may have when you’re using wheel spacers. HFM.Parts Wheel Studs provide an extra 20 mm of thread from the standard 40mm wheel studs, and the Bull Nose end makes them easy to thread on during quick changes as they help to locate and prevent cross-threading.
M12x1.5mm
Knurl 12mm or 14mm
10.9 Grade
Total Length 60mm
MX-5 NA, NB, NC, ND and Abath 124 require the 12mm Knurl set for both front and rear hubs.
MX-5 NA8 and NB require the 12mm Knurl set for the front hubs and the 14mm Knurl set for the rear hubs.
*Please measure and double-check what size you have before purchasing in case there is more variation.
Compatibility
| MX-5 NA (1989-1998) | ||||||
| MX-5 NB (1998-2005) |
In the Box
Your Choice:
1x Single 12mm Knurl Wheel Stud
1x Single 14mm Knurl Wheel Stud
FAQs
Install Guides
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page
Related products
-
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/2022/02/Spare-Lug-Nut-M125-600x480.jpg)
$ 3.30Open Ended Lug Nut (Single)
Suits M12 x 1.25mm & M12 x 1.5mm ApplicationsYour Price$ 2.81Save 15% -
Original price was: $ 3,850.00.$ 2,502.50Current price is: $ 2,502.50.Limited Run Omori Styled Monoblock Forged Wheel 18x10" - (Set of 4)
Suits: Skyline GTR -
$ 10.00Wilwood Caliper Conversion Brake Fitting
Size: 1/8" - 27 NPT Tapered Thread to M10 x 1.00mmYour Price$ 8.50Save 15% -
$ 152.00 – $ 330.00Wilwood Front Brake Pad Set
Suits: Wilwood Caliper P/N 120-11573Your Price$ 129.20 – $ 280.50Save 15%
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!