Hub Centric Conversion Billet Wheel Spacers – 5×100 PCD 56.1 Hub to 5×114.3 PCD 66.1 (0011)
Hub Centric Conversion Billet Wheel Spacers - 5x100 PCD 56.1 Hub to 5x114.3 PCD 66.1 (15mm)
$ 114.00
Your Price
$ 96.90
Fitment Notes
If your vehicle is not listed in our Fitment List, then we don't know if it will fit your vehicle.
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
[iconic_wsb_fbt]
Description
Save money on high-quality performance parts with our scratch and save selection. These products may have minor cosmetic imperfections, such as light scratches, minor blemishes, or slight discoloration. However, they are fully functional and their performance is not affected in any way.
1. Images: We have take Hig-Res images of the exact product you are purchasing. We strive to capture all imperfections in the photos, but some minor markings might be missed. Contact us if you have any questions.
2. Returns: Returns are not accepted on any Scratch & Save item, for any reason other than those that fall under our warranty.
3. Warranty: We stand by our quality and your item is still covered by our standard warranty.
Notes:
Cosmetic marks from fitment.
Compatibility
Fitment:
Requirements:
PCD – 5 x 100mm converts to 5 x 114.3mm
HUB – 56.1mm
OD – 150mm
Bolt Type – M12 x 1.25
In the Box
1x Pair of billet aluminium wheel spacers
Bolts & Studs for fitment
FAQs
Q. Will this fit my vehicle?
A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle
is
not
listed, then we don't know if it fits.
Q. How do I know if these wheel spacers will fit my car?
A. These wheel spacers must be matched to your vehicles PCD and Hub. If they are 5 x 100 PCD with a 56.1 Hub, then these will fit.
Q. Will these spacers be Hub Centric?
A. Yes, they are Hub Centric to suit a 56.1mm hub.
Q. Will I need to cut my wheel studs?
A. Your rim will need to sit flush with the wheel spacer, If your wheel studs protrude further than the spacer, interfering with the rim, you will need to trim the studs down.
Q. What torque settings should I use?
A. As per the factory settings, we recommend 89 ft lbs or 120 Nm. If you use a higher setting you risk stripping the stud from the spacer.
Install Guides
Disclaimer
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page
Customer Photos
