Bull Nose Extended Wheel Stud (Single) for MX-5 & 124

Suits: Mazda MX-5 NA, NB, NC, ND, Abarth 124 (12.8mm or 14.7mm knurl)

A single 60mm bullnose stud for the MX-5 and Abarth 124. Replace one, or top up a set.

60mm long, up from the factory 40mm
M12 x 1.5mm thread, grade 10.9
12.8mm or 14.7mm knurl to suit your hub
Surface treated for corrosion resistance

bull nose extended wheel stud for mx 5 na, nb

bull nose extended wheel stud for mx 5 na, nb, nc, nd, abath 124

MX5WS-R

★ 4.9 98 reviews

$4.95 AUD

Options

12.8mm Knurl

$4.95

14.7mm Knurl

$4.95

Clear

Options

12.8mm Knurl In Stock $4.95

14.7mm Knurl In Stock $4.95

Extras

Bull Nose Extended Wheel Studs for MX-5 & 124 In stock MX5WS $39.95 AUD

Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single) M12 x 1.5mm In stock SM15-BLCK $3.95 AUD

Check your fitment

Overview

Why upgrade

Wheel spacers leave less thread for your wheel nuts. This stud is 60mm long, 20mm longer than the factory 40mm stud, so you get that thread back. The bullnose tip locates the nut and helps stop cross-threading.

It’s the same stud as our Bull Nose extended wheel stud pack, sold on its own.

Which knurl do I need?

MX-5 NA6, NC, ND and Abarth 124: 12.8mm knurl, front and rear
MX-5 NA8 and NB: 12.8mm knurl front, 14.7mm knurl rear

Measure your factory studs before ordering, in case your car differs.

Specifications

Thread	M12 x 1.5mm
Total length	60mm (factory stud 40mm)
Knurl width	12.8mm or 14.7mm
Grade	10.9
Tip	Bullnose
Sold as	Single stud

Fitting

Fit it in place of the factory stud, then torque your wheel nuts to the factory spec.

We recommend installation by a licensed mechanic.

Pairs with

Provides an Extra 20mm Of Thread
Bull Nosed Makes for Quicker Changes
Balanced Material for Hardness & Environmental Resistance

Free AU shipping over $250

In-stock orders dispatched within 24 hours from Melbourne.

2-year warranty

Every part covered against defects from day one. We repair, replace, or refund — your call.

30-day returns

Faulty part? Free return, full refund. Changed your mind? Full store credit, no fees deducted.

Ships worldwide

International shipping available to most countries. Rates calculated at checkout.

In the box

What's Included

1× Bull Nose extended wheel stud, M12 x 1.5 x 60mm (12.8mm or 14.7mm knurl)

Community

Customer Installs

high volume brake master cylinder upgrade for mazda mx 5 na, nb

aluminium cooling panel suits: subaru brz zc6, toyota 86 zn6

324mm front two piece brake upgrade kit suits: r32 gtr

Mx-5 (NA) HFM.Parts Steering Rack Spacer

front rh & lh seat cover (blue/gray) small imperfections to suit nissan r32 gtr

280mm two piece front rotors to suit mazda mx 5 (intro price)

wilwood forged superlite internal caliper 120 11134

omori styled monoblock forged wheel 18x10" (set of 4) limited run

HFM.Parts gear shifter and handbrake boot set for Nissan Skyline R34

Product Information

Will it fit your car?

Find your car in the list below and add it to your garage. Every part page then checks it for you.

Fits 5 vehicles across 2 models

Abarth 1241

348

Abarth 124 Spider 2016–2020

2016–2020

Mazda MX-54

NA, NA6CE, NA8C

Mazda MX-5 NA B6-ZE · BP-ZE · 1989–1998

1989–1998

Mazda MX-5 NB B6-ZE · BP-4W · BP-Z3 · BP-4W turbo · 1998–2005

1998–2005

Mazda MX-5 NC LF-VE · LF-DE · L8-VE · 2005–2015

2005–2015

Mazda MX-5 ND P5-VPS · PE-VPS · 2015

2015

We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits.

MX-5 NA6, NC, ND and Abarth 124 use the 12.8mm knurl front and rear. MX-5 NA8 and NB use the 12.8mm knurl front and the 14.7mm knurl rear. Measure your factory studs before ordering, in case your car differs.

20mm. The stud is 60mm long, against the factory 40mm.

Yes. It's the same stud as our pack of 8, sold singly.

Our Story

We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.

The HFM.Parts brand was born

We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.

From Our Customers

Be the first to review this product. Here's what other customers have been saying about our range:

Barry Callanan ✓ Verified

Sep 22, 2026

HFM.Parts Replacement Cap for BM57 Brake Master Cylinder (Nissan Skyline, Silvia, 180SX, 240SX & 300ZX Z32, RHD & LHD) →

Fits ok.
Troy Matilla ✓ Verified

Mar 12, 2025

HFM.Parts Aluminium Hub Rings 56.1mm ID (Pair) for Toyota 86 ZN6 & Subaru BRZ ZC6 →

High Quality Hub Centric Rings.
Dan ✓ Verified

Apr 15, 2024

HFM.Parts M12 x 1.25 / M12 x 1.5 Open-Ended Steel Lug Nuts (Set of 20) for Nissan, Toyota 86 & Subaru BRZ →

Great quality steel wheel nuts at a great price.
Adam

Jan 10, 2024

HFM.Parts Aluminium Hub Rings 56.1mm ID (Pair) for Toyota 86 ZN6 & Subaru BRZ ZC6 →

Excellent fitment
Andrew C ✓ Verified

Aug 1, 2023

HFM.Parts Aluminium Hub Rings 56.1mm ID (Pair) for Toyota 86 ZN6 & Subaru BRZ ZC6 →

These are literally the best hub rings Ive had on any of my cars. I know I have a soft spot for machined parts but it's such a snug fit. Accidentally ordered an extra 2 pairs but honestly don't care that I paid double what I needed to, they're just what I needed and now I have spares I guess haha.
Andrew ✓ Verified

Aug 1, 2023

HFM.Parts Aluminium Hub Rings 56.1mm ID (Pair) for Toyota 86 ZN6 & Subaru BRZ ZC6 →

These are literally the best hub rings Ive had on any of my cars. I know I have a soft spot for machined parts but it's such a snug fit. Accidentally ordered an extra 2 pairs but honestly don't care that I paid double what I needed to, they're just what I needed and now I have spares I guess haha.

Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!

Leave a Review

HFM.Parts M12 x 1.5 x 60mm Bull Nose Extended Wheel Stud (Single) for Mazda MX-5 (NA, NB, NC, ND) & Abarth 124

Recommended for you

Other options in this range for the same vehicles.

Bull Nose Extended Wheel Studs for MX-5 & 124

Suits: Mazda MX-5 NA, NB, NC, ND, Abarth 124 (12.8mm or 14.7mm knurl)

MX5WS

$39.95 AUD
Delrin Window Guides for MX-5 NA & NB (Pair)

Suits: Mazda MX-5 NA, NB

MXWBSH

$39.00 AUD
Delrin Gear Shifter Bush for MX-5 NA & NB

Suits: Mazda MX-5 NA, NB (5-speed with 18.6mm OD bush)

MXSHTB

$10.00 AUD

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us

BrakesRotors to pads

CylindersBrake and clutch

Nissan Skyline

Silvia, Z & Stagea

86 & BRZ

MX-5 & 124

Subaru