340mm Rear Caliper Adapters for GTR (R33 Brembo)
Suits: Nissan Skyline R32 GTR, R33 GTR, R34 GTR (300mm rear) running R33 GTR rear Brembo calipers and HFM.Parts 340mm rear rotors
Run 340mm rear rotors on your GTR’s rear Brembo calipers. These brackets space the R33 GTR rear Brembo out to suit the bigger rotor.
- Suits R33 GTR rear Brembo calipers
- Billet T6-6061 aluminium, hard anodised
- Stainless steel Heli-Coil thread inserts
- Pairs with HFM.Parts 340mm rear rotors
$209.00 AUD
Requirements
Why upgrade
These adapters let you step up from 297mm or 300mm rear rotors to 340mm without changing calipers. They move the R33 GTR rear Brembo outward to line up with the larger rotor.
They’re machined from billet T6-6061 aluminium, hard anodised, with stainless steel Heli-Coil thread inserts. Designed and developed in Australia.
Will it fit my car?
They suit R32, R33 and R34 GTR running R33 GTR rear Brembo calipers, 17″ wheels or larger and HFM.Parts 340mm rear rotors.
R32 GTR with 297mm rear rotors: fit R33 GTR rear Brembos first. R34 GTR: 300mm rear rotor cars only, not factory 322mm.
Want the lot? The 340mm rear brake upgrade kit for GTR includes these adapters and the rotors.
Specifications
| Material | Billet T6-6061 aluminium, hard anodised |
|---|---|
| Threads | Stainless steel Heli-Coil thread inserts |
| Caliper | R33 GTR rear Brembo |
| Rotor | HFM.Parts 340mm rear |
| Minimum wheel size | 17″ |
| Position | Rear |
| Sold as | Pair, with bolts |
Fitting
Remove the caliper and rotor. You may need to peel back or trim the outer edge of the backing plate.
Bolt the adapter to the stub axle first using the cap head bolts, with a thread locker such as Loctite 262. Fit the rotor, then mount the caliper to the adapter with the hex head bolts. See the 340mm rotor caliper adapter install guide.
We recommend installation by a licensed mechanic.
Pairs with
What's Included
-
2× 340mm rear caliper adapter bracket (R33 GTR Brembo)
-
1× Bolt kit: cap head bolts (adapter) and hex head bolts (caliper)
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Install Guides
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
You may also like…
-
340mm Rear Brake Kit for GTR (R33 Brembo)
Suits: Nissan Skyline R32 GTR, R33 GTR, R34 GTR (300mm rear) running R33 GTR rear Brembo calipers
$608.00 AUD -
340mm Rear Rotors for S/R Chassis & GTR
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR (with HFM.Parts 340mm rear caliper adapters)
$399.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!