Remove the Caliper and rotor from their original position. You may need to peel back or remove the outer edges of the backing plate.
Make sure to install the HFM.Parts Caliper Adapter to the stub axle first using the bolts supplied. We recommend using a good thread sealant such as Loctite 262 or equivalent.
Please Note: There are two types of bolts supplied.
When fitting the adapter to the Stub Axle, use the Cap Head Bolts.
Then when re-installing the Caliper to the Adapter, use the Hex Head Bolts
Haven’t got your hands on one yet?
-
HFM.Parts 340mm Rear Caliper Adapter Brackets for Nissan Skyline R32 / R33 / R34 GTR with R33 GTR Brembo Calipers$209.00 AUD -
HFM.Parts 340mm Rear Brake Rotors (Pair) for Nissan Silvia S13 / S14 / S15 / 180SX & Skyline R32 / R33 / R34 incl. GTR$399.00 AUD -
HFM.Parts 340mm Rear Brake Upgrade Kit for Nissan Skyline R32 / R33 / R34 GTR with R33 GTR Brembo Calipers$608.00 AUD
