-
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD -
BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$3.95 AUD -
3" Silicone Brake Duct Hose
Suits: Universal fit. Any brake cooling setup running 3" (76mm) duct.
Price range: $79.00 through $149.00 AUD -
BM57 Brake Master Reservoir Relocation Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$119.00 AUD -
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
M10 x 1.0mm Caliper Speed Bleeder Valve
Suits: calipers with an M10 x 1.0 bleeder thread, including most Akebono, Sumitomo and Brembo calipers
$19.95 AUD -
Wilwood Brake Pads for Caliper 120-13839
Suits: Wilwood Forged Dynalite caliper 120-13839
Price range: $155.00 through $275.00 AUD -
Wilwood Brake Pads for Superlite 120-11134 & 120-11133
Suits: Wilwood Forged Superlite calipers 120-11134 and 120-11133
Price range: $215.00 through $299.00 AUD -
Wilwood Brake Pads for Caliper 120-11573
Suits: Wilwood Forged Dynalite caliper 120-11573
Price range: $152.00 through $330.00 AUD
Nissan · 1993–98
Skyline R33 GTS-T
Parts for the Nissan Skyline R33 GTS-T (ECR33). The 324mm front brake kit keeps your factory front calipers, and the 337mm rear brake kit keeps the factory rear caliper and handbrake. The R33 GTS-T uses a push-type clutch slave, so pick our push-type big bore slave and pair it with a new clutch master cylinder.
Free AU shipping over $250
Same-day dispatch before 1PM AEST
2-year warranty
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
