-
Bench Bleeding Line for Brake & Clutch Masters
Suits: brake and clutch master cylinders with M10 x 1.0 or M12 x 1.0 outlets
$25.00 AUD -
Brake & Clutch Reservoir Sweatband
Suits: most brake and clutch master cylinder reservoirs (Small 30 x 30mm or Large 60 x 70mm)
$8.00 AUD -
Brake Booster Push Rod Adjusting Tool
Suits: all HFM.Parts brake master cylinders and most brake boosters with an adjustable push rod
$39.00 AUD -
Wilwood Brake Bias Valve 260-12627
Suits: Nissan Skyline R32, R33, R34, Silvia S13, S14, S15, 180SX, 300ZX Z32 and other cars with M10 x 1 bubble-flare lines
$110.00 AUD -
BM57 17/16" (27mm) Brake Master Cylinder Rebuild Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$99.95 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD -
BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$3.95 AUD -
3" Silicone Brake Duct Hose
Suits: Universal fit. Any brake cooling setup running 3" (76mm) duct.
Price range: $79.00 through $149.00 AUD -
BM57 Brake Master Reservoir Relocation Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$119.00 AUD -
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
337mm Rear Rotors (Original Design) for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo, with HFM.Parts 337mm adapters, 17" wheels minimum)
$350.00 AUD -
Scratch & Save 354mm Akebono Caliper Adaptor Brackets for S/R Chassis
Suits: Nissan Silvia S13, S14, S15, Skyline R32 GTS-T, R33 GTS-T, R34 GT with 370Z Z34 front Akebono or Infiniti G37, Q60, Q70 front calipers (minimum 18" wheels)
$209.00 AUD -
M10 x 1.0mm Caliper Speed Bleeder Valve
Suits: calipers with an M10 x 1.0 bleeder thread, including most Akebono, Sumitomo and Brembo calipers
$19.95 AUD -
Wilwood Brake Pads for Caliper 120-13839
Suits: Wilwood Forged Dynalite caliper 120-13839
Price range: $155.00 through $275.00 AUD -
Wilwood Brake Pads for Superlite 120-11134 & 120-11133
Suits: Wilwood Forged Superlite calipers 120-11134 and 120-11133
Price range: $215.00 through $299.00 AUD -
Wilwood Brake Pads for Caliper 120-11573
Suits: Wilwood Forged Dynalite caliper 120-11573
Price range: $152.00 through $330.00 AUD
Nissan · 1989–93
Skyline R32 GTS-T
Parts for the Nissan Skyline R32 GTS-T (HCR32). The 324mm front brake kit keeps the factory 4-piston front calipers, and the 337mm rear brake kit keeps the factory rear caliper and handbrake. For the clutch we stock a direct-replacement clutch master cylinder and a big bore push-type slave to suit.
Free AU shipping over $250
Same-day dispatch before 1PM AEST
2-year warranty
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
