324mm Front Brake Package with Wilwood Calipers for S13, S14, S15
Suits: Nissan Silvia S13, S14, S15 with S14/S15 5-stud hubs and knuckles (17" wheels minimum)
New Wilwood calipers, 324mm rotors and everything to bolt them on. No need to find and rebuild used factory calipers.
- Wilwood Forged Superlite 120-11133 calipers (pair)
- 324mm HFM.Parts rotors, single-piece or two-piece
- Adapter brackets, braided lines and conversion fittings included
- Needs S14/S15 5-stud hubs and 17″ wheels
$1,611.00 AUD
Inclusions
-
324mm Rotor Caliper Adapter Brackets for Wilwood Calipers
In stock
WIL-NISS324
$209.00 AUD
-
Front Hard Line Delete Braided Brake Lines
In stock
HFM-FBL-S
$142.00 AUD
-
Wilwood Caliper Inlet Fitting, NPT to M10 × 2 (Pair)
In stock
WF1/8-M10
$36.00
Requirements
Why upgrade
Factory 4-piston calipers are getting hard to find and often need rebuilding. This package skips that. You get new Wilwood calipers, 324mm HFM.Parts rotors, our adapter brackets and braided lines, ready to bolt to an S14 or S15 hub and knuckle.
What’s in the package
- 324mm front rotors (pair), single-piece or two-piece
- Wilwood Forged Superlite 120-11133 calipers (pair)
- 324mm caliper adapter brackets for Wilwood calipers (pair)
- Front hard line delete braided brake lines for S13, S14, S15
- 2 x Wilwood caliper conversion fittings
- Optional Wilwood pads: BP10 for street, or BP20 for street and track
The calipers
The Forged Superlite internal caliper uses internal fluid ports, so there are no external crossover tubes to damage. Wilwood calipers run without dust boots. Here’s why.
The included conversion fittings change the Wilwood caliper side inlet from imperial to metric, so our braided lines connect straight up.
Choose your rotor
Single-piece rotors have a slotted face. The slots have a slight curve to help keep the pad surface clean and improve ventilation. The hub is painted black for rust resistance.
Two-piece rotors weigh 7.4kg each, 1.5kg less per corner than our 8.9kg single-piece rotors. The ring is free to expand and contract as it heats and cools, and the centre hat is heat-treated T6-6061 aluminium. When the rings wear out, keep the hats and replace just the rotor rings.
Ready to fit
Single-piece: Every rotor is runout tested and balanced before it leaves us, so it’s a direct bolt-on straight out of the box.
Two-piece: Two-piece rotors arrive with the hat and ring already bolted together, runout tested and balanced as an assembly. Always check the hat bolts are at 13–15 ft-lb before fitting, as you would with any two-piece rotor. Otherwise, it’s a direct bolt-on.
Will it fit my car?
The package bolts to the factory S14 or S15 5-stud hub and knuckle. S13 owners need to fit S14 or S15 hubs and knuckles first.
You need 17″ wheels or larger. Check the wheel clearance diagram in the gallery against your wheels before ordering.
Specifications
| Rotor diameter | 324mm |
|---|---|
| Rotor thickness | 30mm |
| Minimum thickness | 28mm |
| Rotor height | 53.8mm |
| Centre bore | 68mm |
| Stud holes | 5 |
| Directional | No, fits either side |
| Rotor options | Single-piece (8.9kg per rotor) or two-piece (7.4kg per rotor) |
| Calipers | Wilwood Forged Superlite 120-11133 (pair) |
| Adapter brackets | Billet aluminium, black anodised, stainless steel Heli-Coils |
| Brake lines | HFM.Parts front hard line delete braided lines, made in Melbourne |
| Conversion fittings | 304 stainless steel, imperial to metric (x2) |
| Wheel size | 17″ minimum |
| Position | Front |
Fitting
Bolt the adapter brackets to the knuckle, fit the conversion fittings to the caliper inlets, then fit the rotors, calipers and braided lines. Rotors fit either side. On two-piece rotors, check the hat bolts are at 13–15 ft-lb before fitting.
Bed in new pads and rotors before hard use. Our Wilwood brake pad guide covers the process.
We recommend installation by a licensed mechanic.
Pairs with
*Keep in mind this is an increase of .9 of Piston Area (in²) from the OEM caliper which, depending on your vehicle’s set up and intended use, could affect your brake bias.
What's Included
-
2× 324mm front brake rotor (single-piece or two-piece, as selected)
-
2× Wilwood Forged Superlite 120-11133 caliper
-
2× 324mm caliper adapter bracket for Wilwood calipers
-
1× Front hard line delete braided brake lines (pair)
-
2× Wilwood caliper conversion fitting
-
1× Wilwood front brake pads (if selected)
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Based on 20 verified reviews