To begin, determine the left and right-hand side adapters.
They are marked as follows:
324R33_L or 324R33_R
- Remove your original Rotor and Caliper and then remove the backing plate or slice back the outer edges to fit the larger HFM.Parts rotor.
- As shown in the images below, position the Caliper Adapter on the inside of the knuckle and install it using the OEM Hex Head Bolts first.
- Finish the installation using the bolts provided:
2x M12 x 1.25 x 50mm Hex Head Bolts
2x Spring & flat washers. - Repeat this procedure for the other side.
Haven’t got your hands on one yet?
-
HFM.Parts 324mm Two-Piece Front Brake Upgrade Kit for R33 GTS-T Calipers on Nissan Silvia S14, S15 & Skyline R33 GTS-T$608.00 AUD -
HFM.Parts 324mm Front Brake Upgrade Kit, Single or Two-Piece Rotors, for R33 GTS-T / R34 GT Calipers on Nissan Silvia S14, S15 & Skyline R32 GTS-T, R33 GTS-T, R34 GT$608.00 AUD
-
HFM.Parts 324mm Front Rotor Caliper Adapter Brackets for Nissan Skyline R33 GTS-T, R34 GT, Silvia S14, S15 & R32 GTS-T (R33 GTS-T / R34 GT Calipers)$209.00 AUD
