- Remove Caliper and Rotor from their original position.
- Remove the backing plate or slice back the outer edges to fit the large 300mm Rotors.
- Be sure to install the HFM.Parts Caliper Adapter to the stub axle first using the bolts supplied.
(We recommend using a good thread sealant such as Loctite 262)
Please Note: There are two types of bolts supplied.
When fitting the adapter to the Stub Axle, be sure to use the Socket Head Cap Screws & Spring Washers.
Then when re-installing the Caliper to the Adapter, use the Hex Head Bolts, Spring & Flat Washers.
