Description
Lowering your car inevitably pulls your steering out of alignment which can make your car difficult to control. Returning your car to its correct steering geometry is as simple as installing misalignment tie rod ends. HFM.Parts High Misalignment Tie Rod Ends are built to out preform, utilising aerospace materials and specialty coatings to ensure longevity and high performance.
Our Shank & Tie Rod Assembly is made of heavy-duty 4130cr, with the ball and race of the Rod End lined in PTFE (commonly known as Teflon) this prevents the rod end from sticking so that it moves freely, preventing premature wear and tear. The entire HFM.Parts Tie Rod End is then “E-Coated” to aid corrosion resistance. While similar to powder coating, E-Coating, provides better coverage on intricate designs.
The Rod End also has 64° of misalignment with an added Bump Steer correction of up to 15mm, in 5mm increments and include Dust Boot’s for added protection.
We recommend having your vehicle’s wheels aligned after installation.
Install Video
Compatibility
Toyota 86 ZN6 (2012-2022)
Requirements
Minimum 17″ Wheels.
OEM Knuckles.
Best suited for vehicles that have been lowered, however, this product can be installed on OEM setups.
Whats in the Box
2x Tie Rod Ends (5/8″)
2x Dust Boot Covers
4x Castle Nuts
4x Split pins
2x Shanks
2x Tie Rod End Assembly’s
FAQ's
No FAQ's Listed. Do you have a Question? Go to Contact Page
Install Guides
Disclaimer
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page
Customer Photos
We're yet to upload our customers photos.
Want to be featured here? Send in your best shots: sales@hfm.parts
Ben Whitaker (verified owner) –
After installing these I could feel near to no bump steer. The bushing quality is much better as the OEM bushes as they seemed to be worned pretty bad from wear and tear. Especially on lowered cars this is a must to get the steering feeling how it should been from factory. Highly recommend these to eliminate and bump steer caused from the suspension.
Cant recommend HFM enough, been using their parts from day dot on this car, every part is top quality.