Name: HFM.Parts 354mm Front Two Piece Rotor Kit: R34 GTT, R33 GTST utilising Akebono Calipers
Brand: HFM.Parts
SKU: R34354AKE-K
Availability: InStock

Free AU Shipping

Suits R34 GTT, R33 GTS-T utilising Akebono Calipers

354mm Front Two Piece Rotor Kit

From: $ 867.00

354mm Front Two Piece Rotors for Nissan 370Z

HFM.Parts Two Piece rotors are designed to be aesthetically pleasing while still offering significant weight savings despite their larger size. Our design allows the rotors to expand & contract with changes in temperature and rotational mass to dissipate heat quickly. The centre hat is a high grade T4-2024 aircraft aluminium that has been strengthened using a heat treating solution. The hat is attached using Conelock nuts and shoulder bolts for increased performance, reliability and longevity.

$ 628.00

In Stock

354mm Front Rotor Caliper Adaptor Brackets: R34 GTT, R33 GTST Akebono Caliper

HFM.Parts Caliper Adapters have been finely crafted from T6-6061 hard anodized billet aluminium, which is known for its exceptional strength and durability. In addition, they are fitted with stainless steel Heli-Coils to maintain their strength over time. One of the key benefits of these Caliper Adapters is that they have been designed and tested in-house to ensure that they are optimised for performance. HFM.Parts Caliper Adapters are a high-quality, reliable solution for anyone looking to upgrade their braking system. With their exceptional strength, durability, and tested performance, you can trust that they will deliver the results you need, every time.

These adaptors provide the following upgrades:
R33 GTS-T: 297mm to 354mm Front Rotors
R34 GTT: 310mm to 354mm Front Rotors
With 370Z Front Akebono Calipers

HFM.Parts Equivalent Rotors
HFM.Parts Full Front Brake Kit

$ 239.00

In Stock

Front Hard Line Delete Braided Brake Lines: R34 GTT, R33 GTST w/ Akebono Caliper

HFM.Parts Front Hard Line Delete Braided Brake Lines have been designed to replace your entire OEM flexible brake line, giving you the extra length needed in your brake line to enable easy installation of our 354mm Front Rotor Kit or Caliper Adaptor Kit.

Add for $ 249.00

Kit

📦 Leaves warehouse We're checking live stock and dispatch times. Please Hold..✅ Pickup Available from South Kingsville, VIC 3015 Ready in 1-2 Hours (10am - 4pm)

SKU: R34354AKE-K

Description

We’ve been excited about this kit for some time, and we’re pleased to introduce to you our 354mm rotor kit for R34GTT & R33 GTST utilising the 370Z Akebono Caliper.

HFM.Parts Two Piece rotors are designed to be aesthetically pleasing while still offering significant weight savings despite their larger size. Our design allows the rotors to expand & contract with changes in temperature and rotational mass to dissipate heat quickly. The centre hat is a high grade T6-7075 aircraft aluminium that has been strengthened using a heat treating solution and anodized black. The hat is attached using Conelock nuts and shoulder bolts for increased performance, reliability and longevity.

Diameter 354 mm
Height 49 mm
Thickness 32 mm
Minimum Thickness 30 mm
Centre Hole 68 mm
Stud Holes 5
Weight 11.2kg/rotor

Install Video

Compatibility

Nissan Skyline R33 GTS-T
Nissan Skyline R34 GTT

Requirements

For installation on R33 GTS-T, the knuckle must be drilled out to M14 to use the included adapter.

Whats in the Box

1x Pair HFM.Parts 354mm Front Two Piece Rotors
1x Pair HFM.Parts Caliper Adaptors

Optional:
1x Pair HFM.Parts Braided Brake Lines

FAQ's

Q. Will this fit my vehicle? A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits. Q. Can I use these adaptor brackets if I have aftermarket lower control arms? A. When installed properly, this adaptor bracket sits close to the lower control arm. In general, if your car retains the OEM stopping position, there should be no interference while using this adaptor. However, we cannot confirm its fitment with any aftermarket products that can change your steering angle. Q. Do I need to get longer brake lines, or can I use the OEM lines? A. While you can retain your OEM brake lines, they will likely be at full extension. We recommend replacing your OEM brake lines with longer braided ones like HFM.Parts Braided Brake Lines, which are an optional add-on.

Install Guides

354mm Adaptor Bracket Installation Guide (R34 GTT, R33 GTST) Install Guide

Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page

Key Features

Our 2-Piece Rotors pack a punch, and we're not the only ones who think so, with feedback of 4.9 stars throughout our entire range.

Read Reviews Customer Photos

Shoulder Bolts

This 12.9 Grade stronger & tighter shoulder connection increases the overall strength and rigidity of the rotor assembly.

Conelock Nuts

Conelocks are self-locking and create a wedge effect when the nut is tightened, causing the nut to grip the threads tightly.

Aluminium Hats

Aerospace Grade 7075-T6 hard anodised billet aluminium rotor hats provide reduced weight & improved heat dissipation.

Caliper Adapters

HFM.Parts Caliper Adapters have been finely crafted from T6-6061 hard anodized billet aluminium and are fitted with quality stainless steel Heli-Coils to maintain strength.

2-Piece Rotors

7075-T6 Aluminium Hats, Scattered Internal Veins & our Signature Slot Design are just some of the features of our 2-piece rotors.

While aesthetically designed, each piece has their place in giving your vehicle better cooling, faster braking, lighter overall weight and the number of slots allow for optimal dust extraction for most common applications.

Customer Photos

Customer Reviews

No Reviews for 354mm Front Two Piece Rotor Kit: R34 GTT, R33 GTST utilising Akebono Calipers Yet.

Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!

Leave a review for “354mm Front Two Piece Rotor Kit: R34 GTT, R33 GTST utilising Akebono Calipers”