Main Menu
Spend $250+ for Free Shipping
Pay Later with AfterPay, Klarna + ZipPay
Spend $250+ for Free Shipping
Pay Later with AfterPay, Klarna + ZipPay
Spend $250+ for Free Shipping
Pay Later with AfterPay, Klarna + ZipPay
Spend $250+ for Free Shipping
Pay Later with AfterPay, Klarna + ZipPay
Spend $250+ for Free Shipping
Pay Later with AfterPay, Klarna + ZipPay
Free AU Shipping

Suits S13, S14, S15, R32 GTS-T

324mm Front Brake Upgrade Kit

4.95 out of 5
(26 customer reviews)

From: $ 548.00

Customise your Product

324mm Front Rotors Suits: R33 GTR, R34 GTR

The HFM.Parts 324mm Rotor comes in single and two-piece configurations; designed as a direct replacement for R33 & R34 GTR and also suited to our 324mm big brake upgrade kits.

The Single Piece Rotors offer a clean, crisp finish and a stunning slot sculpture to complement all HFM.Parts Rear Rotors. The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black-painted hub to improve rust resistance and complete the overall look and performance of the rotor.

The Two-Piece Rotors offer a significant weight saving compared to our Single Piece Rotors.
Our design allows the rotors to expand & contract with changes in temperature and rotational mass to dissipate heat quickly.
The centre hat is a high-grade T4-2024 aircraft aluminium that has been strengthened using a heat-treating solution.

324mm Rotor Caliper Adapter Brackets Suits: S13, S14, S15, R32 GTS-T

$ 189.00

In Stock

R32 GTS-T Front Braided Brake Lines

*R32 GTS-T Only. This is a Hard Line Delete Kit.

S Chassis Front Braided Brake Lines

*S13 / S14 / S15 Only. This is a Hard Line Delete Kit.

Kit
📦 Leaves warehouse We're checking live stock and dispatch times. Please Hold..✅ Pickup Available from South Kingsville, VIC 3015 Ready in 1-2 Hours (10am - 4pm)
SKU: HFM-NISS-BRK-00014S

Description

HFM.Parts 324mm Two Piece Rotors are designed in Australia featuring a striking slot design that matches HFM.Parts Rear Rotors. This rotor has an increase of 44mm from the standard OEM 280mm rotors. This is achieved by using HFM.Parts Australian designed and developed custom caliper adapter set which enables you to use your OEM caliper. Making this a very affordable big brake upgrade kit. The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black anodized aluminium hat to complete the overall look and performance of the rotor.

YouTube video


DIMENSIONS.
Diameter 324 mm
Height 53.8 mm
Thickness 30 mm
Minimum Thickness 28 mm
Centre Hole 68 mm
Stud Holes 5
Weight 7.4kg/rotor

REPLACEMENTS
We stand by our products. You can purchase replacement HFM.Parts 324mm Rotors without the adapters for a great price, ready when you need them.

ADDITIONAL NOTES.
(Optional) To get the most out of this kit we recommend you replace the standard brake pads with DB1346 or equivalent brake pads.

Fitment

Nissan 180SX SR20
Nissan Silvia S13 SR20
Nissan Silvia/200SX S14
Nissan Silvia/200SX S15
Nissan Skyline R32 GTS-T


Requirements

Minimum of 17″ Wheels

S Chassis:
OEM 5 Stud Knuckle
OEM 5 Stud Hub
OEM 4 Piston Caliper


Whats in the Box

1x Pair HFM.Parts 324mm Rotors
1x Pair HFM.Parts Caliper Adapters
High Tensile Nuts & Bolts for Fitment

FAQ's

Q. Why do you recommend to use DB1346 brake pads? A. The DB1346 corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface. Q. What will happen if I use standard brake pads? A. With standard brake pads, you will have a 2mm pad overhang. Using BD3146 or equivalent will reduce the overhang. Q.If you stop making these rotors, is there anywhere else I can get them from? A. Yes, these rotors are readily available from most automotive stores. We will continue to produce these rotors and any other products as long as there is a demand. Q. Will these fit my OEM S13, S14, S15, R32 wheels? A.  No, S13 has 15″ wheels and S14, S15 & R32 GTS-T have 16″ wheels as standard.  This kit requires a minimum of 17″ wheels. Q. I have an aftermarket caliper, can I still use this rotor kit? A. No, this brake kit has been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers. Q. Can I buy the adapters on their own? A. YES! They are available for purchase as a pair from our website. Q. What material are the adapters made from? A. Our adapters are made using high quality T6-6061 Billet Aluminium. Q. If my rotors wear out, can I buy a replacement set? A. Yes, You are able to purchase a pair of rotors without adapters or a pair of rotors without the hats as a cost effective alternative. Q. What is the rotor hat made of? A. High quality T4-2024 Air Craft Aluminium. Q. Do I have to modify any brake components to use this kit? A. No. Q. Are these rotors directional? A. No, you can install them on either side of your car without affecting performance. Q. Can I use this brake kit if I have a 4 stud hub? A. No, you need a 5 stud hub. Q. If I have an aftermarket 5 stud hub on my S13, can I use this brake kit? A. No & Yes. This kit is designed to be fitted on an OEM 5 stud hub. On an S13 knuckle that was originally a 4 stud hub the brake tabs are different thicknesses to an S14/S15 knuckle. You will have a difference of ~3mm and will need to install washers to fill the gap. Q. Why doesn’t the brake pad cover the entire surface of the rotor? A. This kit works by spacing out your existing calipers, which in turn, the brake pads position will follow, to accommodate for the larger rotor. There are no brake pads (that we’re aware of) that will fit within the original caliper and cover more surface area. Q. My rotors arrived pre-assembled, does that mean I can install them right away? A. Although our rotors arrive pre-assembled, we always recommend checking all of the bolts are tight prior to install. We suggest using a torque wrench with settings at 13 – 15 ft lbs.

Install Guides

Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page

Customer Photos

We're yet to upload our customers photos.
Want to be featured here? Send in your best shots: sales@hfm.parts

4.95
4.95 out of 5

Customer Reviews

Overall rating for 26 first-party reviews.
  1. 5 out of 5

    Blake Morgan (verified owner)

    We are currently running the 2 piece brake discs on our endurance race car and they are doing a great job. The weight saving, cooling, reduced replacement cost and the look are all great points as to us returning for more. The team at HFM are knowledgeable on there product and are commited to working through the intricacies of racing with us. GREAT JOB!!

  2. 5 out of 5

    Blake Morgan (verified owner)

    Using the 2 piece rotors on our endurance car and so far the results are good. Huge weight difference, better cooling, cheaper rotor replacement,and the look is just a bonus. The HFM Team are great with there backup service and comitment to working on some of the more intricacies of a race car. GREAT JOB.

  3. 4 out of 5

    Kevin ho (verified owner)

    Worked great but should supply another set of washers, ran into slight clearance issues. Had to stack the older ones to provide just enough clearance

  4. 5 out of 5

    Damien (verified owner)

    Easy install works perfectly on my track car

  5. 5 out of 5

    Anonymous

    Great quality, super light and actual bolt on fitment. Great budget upgrade for a street car!

  6. 5 out of 5

    Stuart Jackson (verified owner)

    Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag “no biggy had some spares in my garage” and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can’t wait to see how they go at my next time attack day.

  7. 5 out of 5

    Brett Noakes (verified owner)

    Awesome upgrade and still retaining stock calipers. Combined with the rear brake upgrade and HFM BM57 master cylinder. Great long lasting stopping power we have street and track tested this combo with great results. Its totally transformed the car.

    Great after sales service cheap as and fast shipping.

    Thanks to HFM Dot Parts for the killa and ultra simple upgrades keep up the great work from the team at Noakie Spec Racing
    https://www.facebook.com/NoakieSpecRacing

  8. 5 out of 5

    Brett Noakes (verified owner)

    Awesome kit i have great results form street and track testing. Great price. Has totally transformed the car with combining the rear upgrade and hfm bm57 master.

    Plenty of after sales support and fast shipping.

    Thanks to HFM. Parts from the Team at
    Noakie Spec Racing
    Keep up the killa work.

  9. 5 out of 5

    Luke Fowler (verified owner)

    Very quick shipping during pandemic. Allowed me to install straight away

  10. 5 out of 5

    MATTHEW craig (verified owner)

    Very simple to install would highly recommend these parts for your silvia

  11. 5 out of 5

    Andrew Clifton (verified owner)

    Great quality and fitment, super fast postage. Very happy

  12. 5 out of 5

    Austin Mason (verified owner)

    Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!

  13. 5 out of 5

    Dion Coulls (verified owner)

    We run these rotors on our race car without any issues at all. Great fit and the overall finish and quality is second to none.

    Would recommend these on any street or race application as an upgrade.

  14. 5 out of 5

    Dion Coulls (verified owner)

    A true bolt on product. It is a perfect fit and super simple to install. The finish and overall quality of the product is 10/10.

  15. 5 out of 5

    Brent Gregory (verified owner)

    Everything bolted up just how the instructions guided. Great fitment and easy to install. The only downside is I couldn’t justify ordering the whole kit with rotors due to the shipping being high. This should be marketed more in the US since no one is doing it here. 10/10 would recommend to anyone looking into a rotor upgrade on their car. Top marks for this company!

  16. 5 out of 5

    Steve (verified owner)

    Opting to keep my 17″ wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my – and arguably most – 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively.

    The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb.
    The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle – trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too!
    This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing.

    Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top.
    Great piece of gear HFM, keep up the great work!

    These brakes fit under R33 GTR Wheels, 17×9 +22 Advan SA3R’s and 17×9 +22 Sparco Crimson.

  17. 5 out of 5

    Adrian Oliver (verified owner)

    Very good to deal with

  18. 5 out of 5

    Andrew Finn (verified owner)

    very good and great repsonse times, product feels good

  19. 5 out of 5

    Rodney petrovic (verified owner)

    Very good would go through them again

  20. 5 out of 5

    garry stanton (verified owner)

    yeah great install havent used them yet but sure they will be great

  21. 5 out of 5

    Riley McConaughey (verified owner)

    Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you

  22. 5 out of 5

    Shaun Ewing (verified owner)

    Overall an easy install, everything works great and looks fantastic!

  23. 5 out of 5

    Stephen Henley (verified owner)

    Excellent service, fast freight time, will most definitely use again.

  24. 5 out of 5

    Alan U. (verified owner)

    Very nice product, fitted perfectly

Leave a Review
Leave a review


0
Spend $ 250.00 for free AU shipping
Welcome Guest! Waving Emoji Join HFM.Parts to save your cart, save products for later, get exclusive discounts & more! Register Already a customer? Sign in
Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products