New 2 Piece GTR & R33 Kit
HFM 324mm 2 Piece Rotor for R33/R34 GTR
HFM 324mm 2 Piece Rotor Rear Side for R33/R34 GTR
HFM 324mm 2 Piece Rotor Features for R33/R34 GTR
New 2 Piece GTR & R33 Kit
HFM 324mm 2 Piece Rotor for R33/R34 GTR
HFM 324mm 2 Piece Rotor Rear Side for R33/R34 GTR
HFM 324mm 2 Piece Rotor Features for R33/R34 GTR

324mm Front Brake Upgrade Kit Suits: R32 GTR

324mm Front Brake Upgrade Kit

Suits: R32 GTR

(24 customer reviews)

$ 538.00 – $ 654.00

Customise your Product

HFM 324mm 2 Piece Rotor for R33/R34 GTR

324mm Front Rotors Suits: R33 GTR, R34 GTR

The HFM.Parts 324mm Rotor comes in single and two-piece configurations; designed as a direct replacement for R33 & R34 GTR and also suited to our 324mm big brake upgrade kits.

The Single Piece Rotors offer a clean, crisp finish and a stunning slot sculpture to complement all HFM.Parts Rear Rotors. The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black-painted hub to improve rust resistance and complete the overall look and performance of the rotor.

The Two-Piece Rotors offer a significant weight saving compared to our Single Piece Rotors.
Our design allows the rotors to expand & contract with changes in temperature and rotational mass to dissipate heat quickly.
The centre hat is a high-grade T4-2024 aircraft aluminium that has been strengthened using a heat-treating solution.

Clear
324mm Rotor Caliper Adapter Brackets Suits: R32 GTR 1

324mm Rotor Caliper Adapter Brackets Suits: R32 GTR

$ 179.00

In stock

- +
Categories: , Tag:
Leaves warehouse We're checking live stock and dispatch times. Please Hold..Pickup Available (Ready in 1-2 Hours) HFM.Parts Warehouse in South Kingsville, VIC 3015 (10am - 4PM)
We did this for you.

Hey there! Live within Australia?

We’ve got an exclusive offer for you. We’re so confident in the quality of our wheels that we want everyone to be able to get their hands on a set.

  • Use code AUWHEELS at checkout for $500 off (Limited Offer)
  • PLUS, get FREE standard postage to any Australian Address.

Questions? Open a live chat; our team are super responsive.

We did this for you.

We heard you. Postage is expensive, and we’ve gone up and back with our couriers to negotiate a better deal on your behalf.

Well, you better believe it. We’re now offering free postage on any set of forged wheels to New Zealand, the United States, Canada & the United Kingdom for a limited time.

  • How? Add your desired wheels and click checkout. We automatically apply the postage discount at checkout.

Not from a listed country? Let’s chat. Open a live chat and let us know where you’re from, and we’ll see what we can do. (our team are super responsive).

Description

HFM.Parts 324mm Rotors are designed in Australia featuring a striking slot design that matches HFM.Parts Rear Rotors. This rotor has an increase of 28mm from the standard OEM 296mm rotors. This is achieved by using HFM.Parts Australian designed and developed custom caliper adapter set which enables you to use your OEM caliper. Making this a very affordable big brake upgrade kit. The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black painted hub to improve rust resistance and complete the overall look and performance of the rotor.

Please note: this brake kit has been updated to include our new design adaptors, which no longer require Nylock Nuts. Our adaptors now have stainless steel Heli-Coils.

YouTube video


REPLACEMENTS

We stand by our products. You can purchase replacement HFM.Parts 324mm Rotors without the adapters for a great price, ready when you need them.

DIMENSIONS.

Diameter 324 mm
Height 53.8 mm
Thickness 30 mm
Minimum Thickness 28 mm
Centre Hole 68 mm
Stud Holes 5
Weight 8.9kg/rotor

SKU: HFM-NISS-BRK-00010

Product Fitment & Requirements

Nissan Skyline R32 GTR

Requirements

Minimum of 17″ Wheels
OEM Calipers (No Brembo)


Whats in the Box

1 Pair HFM.Parts 324mm Rotors
1 Pair HFM.Parts Caliper Adapters
Bolt kits for Fitment

FAQ's

Q. Why do you recommend to use DB1346 brake pads? A. The DB1346 corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface. Q. What will happen if I use standard brake pads? A. Although you can use your standard brake pads, you will have a 2mm pad overhang. Using DB1346 or equivalent will reduce the overhang. Q. If you stop making these rotors, is there anywhere else I can get them from? A. Yes, these rotors are readily available from most automotive stores. We will continue to produce these rotors and any other products as long as there is a demand. Q. Will these fit my OEM R32 GTR wheels? A.  No, an OEM R32 GTR has 16″ wheels. This kit requires a minimum of 17″ wheels. Q. I have an aftermarket caliper, can I still use this rotor kit? A. No, this brake kit has been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers. Q. Can I buy the adapters on their own? A. YES! They are available for purchase as a pair from our website. Q. What material are the adapters made from? A. Our adapters are made using high quality T6-6061 Billet Aluminium. Q. If my rotors wear out, can I buy a replacement set? A. Yes, You are able to purchase a pair of rotors without adapters. Q. Do I have to modify any brake components to use this kit? A. Yes, you will need to modify the knuckle in order to fit the adapters. Please see the video above for installation instructions. Q. Are these rotors directional? A. No, you can install them on either side of your car without affecting performance. Q. Why doesn’t the brake pad cover the entire surface of the rotor? A. This kit works by spacing out your existing calipers, which in turn, the brake pads position will follow, to accommodate for the larger rotor. There are no brake pads (that we’re aware of) that will fit within the original caliper and cover more surface area. Q. Will grinding/linishing the knuckle affect it’s strength? A. You only need to linish a very small portion of your knuckle to allow the adapter to line up correctly. Because it is a very small amount, it will not affect the integrity of the knuckle. Please see our installation video above to watch the grinding/linishing process.

Installation Guides & Disclaimer

324mm Rotor Caliper Adapters (R32 GTR) Install Guide
 

Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page

Customer Reviews

24 reviews for 324mm Front Brake Upgrade Kit Suits: R32 GTR

  1. Avatar of Kevin ho

    Kevin ho (verified owner) –

    Worked great but should supply another set of washers, ran into slight clearance issues. Had to stack the older ones to provide just enough clearance

  2. Avatar of Damien

    Damien (verified owner) –

    Easy install works perfectly on my track car

  3. Avatar of Anonymous

    Anonymous –

    Great quality, super light and actual bolt on fitment. Great budget upgrade for a street car!

  4. Avatar of Stuart Jackson

    Stuart Jackson (verified owner) –

    Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag “no biggy had some spares in my garage” and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can’t wait to see how they go at my next time attack day.

  5. Avatar of Brett Noakes

    Brett Noakes (verified owner) –

    Awesome upgrade and still retaining stock calipers. Combined with the rear brake upgrade and HFM BM57 master cylinder. Great long lasting stopping power we have street and track tested this combo with great results. Its totally transformed the car.

    Great after sales service cheap as and fast shipping.

    Thanks to HFM Dot Parts for the killa and ultra simple upgrades keep up the great work from the team at Noakie Spec Racing
    https://www.facebook.com/NoakieSpecRacing

  6. Avatar of Brett Noakes

    Brett Noakes (verified owner) –

    Awesome kit i have great results form street and track testing. Great price. Has totally transformed the car with combining the rear upgrade and hfm bm57 master.

    Plenty of after sales support and fast shipping.

    Thanks to HFM. Parts from the Team at
    Noakie Spec Racing
    Keep up the killa work.

  7. Avatar of Luke Fowler

    Luke Fowler (verified owner) –

    Very quick shipping during pandemic. Allowed me to install straight away

  8. Avatar of MATTHEW craig

    MATTHEW craig (verified owner) –

    Very simple to install would highly recommend these parts for your silvia

  9. Avatar of Andrew Clifton

    Andrew Clifton (verified owner) –

    Great quality and fitment, super fast postage. Very happy

  10. Avatar of Austin Mason

    Austin Mason (verified owner) –

    Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!

  11. Avatar of Dion Coulls

    Dion Coulls (verified owner) –

    We run these rotors on our race car without any issues at all. Great fit and the overall finish and quality is second to none.

    Would recommend these on any street or race application as an upgrade.

  12. Avatar of Dion Coulls

    Dion Coulls (verified owner) –

    A true bolt on product. It is a perfect fit and super simple to install. The finish and overall quality of the product is 10/10.

  13. Avatar of Brent Gregory

    Brent Gregory (verified owner) –

    Everything bolted up just how the instructions guided. Great fitment and easy to install. The only downside is I couldn’t justify ordering the whole kit with rotors due to the shipping being high. This should be marketed more in the US since no one is doing it here. 10/10 would recommend to anyone looking into a rotor upgrade on their car. Top marks for this company!

  14. Avatar of Steve

    Steve (verified owner) –

    Opting to keep my 17″ wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my – and arguably most – 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively.

    The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb.
    The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle – trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too!
    This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing.

    Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top.
    Great piece of gear HFM, keep up the great work!

    These brakes fit under R33 GTR Wheels, 17×9 +22 Advan SA3R’s and 17×9 +22 Sparco Crimson.

  15. Avatar of Adrian Oliver

    Adrian Oliver (verified owner) –

    Very good to deal with

  16. Avatar of Andrew Finn

    Andrew Finn (verified owner) –

    very good and great repsonse times, product feels good

  17. Avatar of Rodney petrovic

    Rodney petrovic (verified owner) –

    Very good would go through them again

  18. Avatar of garry stanton

    garry stanton (verified owner) –

    yeah great install havent used them yet but sure they will be great

  19. Avatar of Riley McConaughey

    Riley McConaughey (verified owner) –

    Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you

  20. Avatar of Shaun Ewing

    Shaun Ewing (verified owner) –

    Overall an easy install, everything works great and looks fantastic!

  21. Avatar of Stephen Henley

    Stephen Henley (verified owner) –

    Excellent service, fast freight time, will most definitely use again.

  22. Avatar of Alan U.

    Alan U. (verified owner) –

    Very nice product, fitted perfectly

Leave a Review

Leave a review

Your email address will not be published. Required fields are marked *