To begin, determine the left and right-hand side adapters.
They are marked as follows:
324R33_L or 324R33_R
- Remove your original Rotor and Caliper and then remove the backing plate or slice back the outer edges to fit the larger HFM.Parts rotor.
- As shown in the images below, position the Caliper Adapter on the inside of the knuckle and install it using the OEM Hex Head Bolts first.
- Finish the installation using the bolts provided:
2x M12 x 1.25 x 50mm Hex Head Bolts
2x Spring & flat washers. - Repeat this procedure for the other side.