Hub Centric Conversion Billet Wheel Spacers – 5×100 PCD 56.1 HUB to 5×114.3 PCD 56.1 Hub (Pair)

Suits: Subaru BRZ ZC6, Toyota 86 ZN6 + More

$ 44.45$ 60.12 AUD

or 4 interest-free payments via
$200 Min Spend. AU Customers Only.

- +
SKU: HFM-UNIV-WHL-BUNDLE-001 Categories: ,

Our wheel spacers are hard anodized with a matte black finish. They are made of high quality 6061-T6 aluminium and include 10.9 graded bolts.


Subaru BRZ ZC6 (2012 -2019)
Toyota 86 ZN6 (2012 -2019)
Impreza (1993 – 2011)
Forester (1997 – 2018)
WRX (2000 – 2005)
Legacy (1989 – 2009)
Outback (1998 – 2014)
XV (2012 – 2017)


PCD – 5 x 100mm converts to 5 x 114.3mm
HUB – 56.1mm
OD – 150mm
Bolt Type – M12 x 1.25

What You Get

1x Pair of billet aluminium wheel spacers
Bolts & Studs for fitment


Q. How do I know if these wheel spacers will fit my car?
A. These wheel spacers must be matched to your vehicles PCD and Hub. If they are 5 x 100 PCD with a 56.1 Hub, then these will fit.

Q. Will these spacers be Hub Centric?
A. Yes, they are Hub Centric to suit a 56.1mm hub.

Q. Will I need to cut my wheel studs?
A. Your rim will need to sit flush with the wheel spacer, If your wheel studs protrude further than the spacer, interfering with the rim, you will need to trim the studs down.

Q. What torque settings should I use?
A. As per the factory settings, we recommend 89 ft lbs or 120 Nm. If you use a higher setting you risk stripping the stud from the spacer.


Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us at