Multi-Fit Slip On Billet Wheel Spacers – 5×100 or 5×114.3 PCD / 56.1mm Hub (Pair)Suits: Subaru BRZ ZC6, Toyota 86 ZN6 + More
$ 29.70 – $ 40.40 AUD
Our wheel spacers are hard anodized with a matte black finish. They are made of high quality 6061-T6 aluminium and include 10.9 graded bolts.
Subaru BRZ ZC6 (2012 -2019)
Toyota 86 ZN6 (2012 -2019)
Impreza (1993 – 2011)
Forester (1997 – 2018)
WRX (2000 – 2005)
Legacy (1989 – 2009)
Outback (1998 – 2014)
XV (2012 – 2017)
PCD – 5 x 100mm or 114.3mm
HUB – 56.1mm
OD – 150mm
Bolt Type – M12 x 1.25
NOTE: This is a Multi Hole Spacer. This spacer will fit either PCD size listed above.
What You Get
1x Pair of billet aluminium wheel spacers
Bolts & Studs for fitment
Q. How do I know if these wheel spacers will fit my car?
A. These wheel spacers must be matched to your vehicles PCD and Hub. If they are 5 x 100 or 5 x 114.3mm PCD with a 56.1 Hub, then these will fit.
Q. Will these spacers be Hub Centric?
A. Yes, they are Hub Centric to suit a 56.1mm hub.
Q. What torque settings should I use?
A. As per the factory settings, we recommend 89 ft lbs or 120 Nm. If you use a higher setting you risk stripping the stud from the spacer.
Q. What is a Muli-Hole spacer?
A. This means that the spacer can be used on either PCD’s listed as they contain both patterns.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us at firstname.lastname@example.org