324mm Two Piece Front Brake Upgrade KitSuits: S13, S14, S15, R32 GTS-T
$ 614.00 AUD
We have made a very simple big brake upgrade kit that increases your existing rotor size from 296mm to a noticeable 324mm. This means better heat disbursement and better braking.
The way we achieve this is by using our own custom designed and developed adapter set enabling you to use your OEM caliper making this a very affordable big brake upgrade kit.
Diameter 324 mm
Height 53.8 mm
Thickness 30 mm
Minimum Thickness 28 mm
Centre Hole 68 mm
Stud Holes 5
We stand by our products. You can purchase replacement 324mm rotors without the adapters for a great price, ready when you need them.
(Optional) To get the most out of this kit we recommend you replace the standard brake pads with DB1346 or equivalent brake pads.
Nissan Silvia S13 / 180SX
Nissan Silvia S14 / 200SX
Nissan Silvia S15
Nissan Skyline R32 GTS-T
Minimum of 17″ Wheels
OEM 5 Stud Knuckle
OEM 5 Stud Hub
What You Get
1x Pair HFM 324mm Two Piece Rotors
1x Pair HFM Caliper Adapters
High Tensile Nuts & Bolts for Fitment
Q. Why do you recommend to use DB1346 brake pads?
A. The DB1346 corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface.
Q. What will happen if I use standard brake pads?
A. With standard brake pads, you will have a 2mm pad overhang. Using BD3146 or equivalent will reduce the overhang.
Q.If you stop making these rotors, is there anywhere else I can get them from?
A. Yes, these rotors are readily available from most automotive stores. We will continue to produce these rotors and any other products as long as there is a demand.
Q. Will these fit my OEM S13, S14, S15, R32 wheels?
A. No, S13 has 15″ wheels and S14, S15 & R32 GTS-T have 16″ wheels as standard. This kit requires a minimum of 17″ wheels.
Q. I have an aftermarket caliper, can I still use this rotor kit?
A. No, this brake kit has been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers.
Q. Can I buy the adapters on their own?
A. YES! They are available for purchase as a pair from our website.
Q. What material are the adapters made from?
A. Our adapters are made using high quality T6-6061 Billet Aluminium.
Q. If my rotors wear out, can I buy a replacement set?
A. Yes, You are able to purchase a pair of rotors without adapters or a pair of rotors without the hats as a cost effective alternative.
Q. What is the rotor hat made of?
A. High quality T4-2024 Air Craft Aluminium.
Q. Do I have to modify any brake components to use this kit?
Q. Are these rotors directional?
A. No, they’re not.
Q. Can I use this brake kit if I have a 4 stud hub?
A. No, you need a 5 stud hub.
Q. If I have an aftermarket 5 stud hub on my S13, can I use this brake kit?
A. No & Yes. This kit is designed to be fitted on an OEM 5 stud hub. On an S13 knuckle that was originally a 4 stud hub the brake tabs are different thicknesses to an S14/S15 knuckle. You will have a difference of ~3mm and will need to install washers to fill the gap.
* Include a note with your order that you will need washers and we’ll include them with your purchase.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us at email@example.com
Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you
Thank you so much for your review! If you don't mind, we'd love a pic to share!