Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide
Spend $250+ for Free Shipping
Fit it now, Pay it later
Fast Shipping Worldwide

Suits S13, S14, S15

300mm Rear Brake Upgrade Kit

From: $ 434.00

Includes Free Shipping
Free Australia Wide Postage on Order $250+
Customise your Product

300mm Rear Rotors Suits: S13, S14, S15

HFM.Parts 300mm rear rotors are designed in Australia featuring a striking slot design that matches all of HFM.Parts 324mm Front Rotors. This solid rotor has an increase of 42mm from the standard sized OEM rotor.
The indentations have a slight curvature to improve cleaning ability, ventilation & the overall look and performance of the rotor.

$ 255.00
In Stock

300mm Rear Rotor Caliper Adapter Bracket Suits: HFM 300mm Rear Rotors

HFM.Parts Caliper Adapters have been finely crafted from T6-6061 hard anodized billet aluminium, which is known for its exceptional strength and durability. In addition, they are fitted with stainless steel Heli-Coils to maintain their strength over time. One of the key benefits of these Caliper Adapters is that they have been designed and tested in-house to ensure that they are optimised for performance. HFM.Parts Caliper Adapters are a high-quality, reliable solution for anyone looking to upgrade their braking system. With their exceptional strength, durability, and tested performance, you can trust that they will deliver the results you need, every time.

These adaptors provide the following upgrades:
S Chassis: 258mm to 300mm Rear Rotors

$ 179.00
In Stock

S Chassis Rear Braided Brake Lines

HFM.Parts Rear Braided Brake Lines have been designed to complement our big brake kits. Our lines are stronger than OEM rubber lines, reduce that spongy feel and comply with all DOT, TUV, and ADR specifications.

Kit

SKU: HFM-NISS-BRK-00022

Description

HFM.Parts 300mm Rear Rotors are designed in Australia featuring a striking slot design that matches all of their 324mm front rotors. This solid rotor has an increase of 42mm from the standard sized OEM rotor.
This is achieved by using HFM.Parts Australian designed and developed custom caliper adapter set which enables you to use your OEM caliper. Making this a very affordable big brake upgrade kit.
The indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black painted hub to improve rust resistance and complete the overall look and performance of the rotor.


Replacements

We stand by our products. You can purchase replacement HFM.Parts 300mm Rotors without the adapters for a great price, ready when you need them.


Additional

Install Video

Compatibility

Nissan 180SX SR20
Nissan Silvia S13 SR20
Nissan Silvia/200SX S14
Nissan Silvia/200SX S15


Requirements

Minimum of 16″ Wheels
Compatible with 4 & 5 Stud Hubs


Whats in the Box

1x Pair of HFM.Parts 300mm Rear Rotors
1x Pair of HFM.Parts Caliper Adapters
High Tensile Nuts & Bolts for Fitment

FAQ's

Q. Will this fit my vehicle? A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits. Q. If you stop making these rotors, is there anywhere else I can get them from? A. To our knowledge, HFM.Parts 300mm Rotors are unique to HFM.Parts. We will continue to produce these rotors and any other products as long as there is a demand. Q. Will these fit my OEM S13, S14, S15 wheels? A. No, your OEM S13/14/15 wheels are 15″. The minimum wheel requirement is 16″. Q. Will my original brake pads fit this sized rotor? A. Yes, both OEM Caliper & Brake Pads are compatible with this rotor. Q. I have an aftermarket caliper, can I still use this rotor kit? A. No, this brake kit has been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers. Q. If I break/damage/misplace the adapter, can I get a replacement? A. Yes! You can purchase our adapters on their own under the adapters category. Q. What material are the adapters made from? A. Our adapters are made using high quality T6-6061 Billet Aluminium. Q. Do I have to modify any brake components to use this kit? A. Yes, you will need to cut and straighten the backing plate/dust cover. Q. Why doesn’t the brake pad cover the entire surface of the rotor? A. This kit works by spacing out your existing calipers, which in turn, the brake pads position will follow, to accommodate for the larger rotor. There are no brake pads (that we’re aware of) that will fit within the original caliper and cover more surface area. Q. Are these rotors directional? A. No, you can install them on either side of your car without affecting performance.

Install Guides

 

Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us: Go to Contact Page


Customer Photos

We're yet to upload our customers photos.
Want to be featured here? Send in your best shots: sales@hfm.parts


5 Stars
5 out of 5
Customer Reviews
2 reviews
  1. 5 out of 5

    Austin Mason (verified owner)

    Installed these on my s15 and couldn’t be happier, huge upgrade from the standard rotors, they look great and perform even better.
    Install was pretty straight forward
    Would definitely recommend

  2. 5 out of 5

    Dean Simonovic (verified owner)

    I did have to grind off a little caliper metal on drivers side only, the cap head bolt interfered with it, not a big deal, I guess there is variance in the stock nissan caliper forgings, once assembled its all been rock solid for the 2 weeks of daily flogging I mean driving the car gets.

Leave a Review
Leave a review

Search
Main Menu