Our caliper adapters have been finely crafted to enable you to increase your rotor size significantly to our 324mm rotors whilst being able to keep your existing calipers. Giving your S13, S14, S15, R32 GTS-T better heat disbursement and better braking.
Nissan Silvia S13 / 180SX
Nissan Silvia S14 / 200SX
Nissan Silvia S15
Nissan Skyline R32 GTS-T
Minimum 17″ Wheels
No Brembo Brakes
No Single Piston Calipers
For S Chassis:
OEM 5 Stud Knuckle
OEM 5 Stud Hub
This product should be installed by a licensed mechanic.
1x Pair of HFM Caliper Adapters
4x 8.8 Grade Bolts
Q. What brake pads do you recommend to use?
A. We recommend, DB1346 which corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is because the pad material sits lower in the caliper opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface.
Q. What will happen if I use standard brake pads?
A. Although you can use your standard brake pads, you will have a 2mm pad overhang. Using DB1346 or equivalent will reduce the overhang.
Q. Will I still be able to use my OEM S13, S14, S15, R32 wheels?
A. No, S13 has 15″ wheels and S14, S15 & R32 GTS-T have 16″ wheels as standard. These adapters require a minimum of 17″ wheels.
Q. I have an aftermarket caliper, can I still use these adapters?
A. No, these adapters have been designed to suit your OEM caliper. We cannot confirm if it will also suit other calipers.
Q. What material are the adapters made from?
A. Our adapters are made using high quality T6-6061 Aluminium.
Q. Do I have to modify any brake components to use this kit?
Q. Can I use these adapters if I have a 4 stud hub?
A. No, you need a 5 stud hub.
Q. If I have an aftermarket 5 stud hub on my S13, can I use these adapters?
A. No & Yes. They are designed to be fitted on an OEM 5 stud hub. On an S13 knuckle that was originally a 4 stud hub the brake tabs are different thicknesses to an S14/S15 knuckle. You will have a difference of ~3mm and will need to install washers to fill the gap.
* Include a note with your order that you will need washers and we’ll include them with your purchase.