Brake Master Bleeder Cap – 80mm x 3mm

The HFM.Parts bleeder caps are fitted with a Schrader pressure type valve that can be used with or without the valve. The valve can be used two ways: Either with compressed air and no more than 10psi or simply by removing the insert and installing a hose connected to the cap and a pressure unit with fluid. The nipples/bleeders are opened in a sequence until no air is left in the system.

Benefits of Using a Bleeder Cap:

• Prevents Air Contamination: The one-way valve ensures air cannot get back into the system while bleeding the brakes, which is crucial for maintaining effective braking.
• One-Person Brake Bleeding: Allows for easy, one-person brake bleeding, reducing the time and effort typically required for brake bleeding.
• Easy Monitoring: Clear tubing allows you to monitor the brake fluid exiting the system, spot air bubbles, and ensure all air is removed from the brake lines.

It is suited for most BM series brake masters such as BM44, BM50, and BM57, though It may be suited for other models that share the same sized cap (80x3mm thread pitch).