337mm Rotor Caliper Adapter Installation Help Guide
Remove Caliper and rotor from original position. You may need to peel back or remove the outer edges of the backing plate.
Make sure to install the Caliper Adapter to the stub axle first using the bolts supplied. It is recommended to use a good thread type sealant as well.
Please Note: There are two types of bolts supplied.
When fitting the adapter to the Stub Axle use the Cap Head Bolts.
Then when re-installing the Caliper to the Adapter use the Hex Head Bolts
Install the adapter to the inside of the knuckle.
Our instructions are designed to assist, not to teach. Our products should only be installed by a licensed mechanic or an experienced and competent person. Application and suitability for a particular use are the responsibility of the purchaser.
For more help, please email email@example.com